Rapid Bike Blipper Yamaha YZF600R6, 2008-2016
€299.00 gross €416.50 RRP incl. VAT
Product number:
DS-K27-BLIP-003
Product details
Rapid Bike quickshifter Blipper, length approx. 45 mm, diameter approx. 14 mm, for Yamaha YZF600R6 Type: RJ15 (model year 2008-´16), only for use with Rapid Bike EVO/RACING and standard footrest system, for upshifts and downshifts, for standard and reverse shift patterns, not compatible with RB1, RB2, RB3 modulesGeneral description
Rapid Bike BlipperSENSOR WITH LOAD CELL FOR THE ELECTRONIC QUICKSHIFTER
With the new UP/DOWN SHIFT ASSIST ("Blipper"), Rapid Bike takes a remarkable step front thanks to further technological development.
In conjunction with Rapid Bike EVO and RACING modules, the new Blipper allows control of gear changes during upshifts and downshifts, without needing to operate the clutch.
This allows racing enthusiasts even shorter shift times without interrupting power delivery, thus providing greater riding safety and shaving a tenth of a second or two off lap times.
This shift assist system was developed for vehicles with true Ride By Wire.
The electronics communicate with the EVO or RACING module via Rapid Bike's proprietary CAN-bus wiring harness, controlling the shifting processes. The shift time and the required force to trigger the shifting process can be adjusted in the Rapid Bike software or with the You Tune module, tailored to the rider's specific preferences. The necessary adjustment of injection during upshifts can even be set gear-selectively. Similarly, the duration of the speed increase during downshifts is adjustable.
The Blipper can be used with both standard and reverse shift patterns.
NOTE: Please note that a connection between the Rapid Bike EVO module and the computer must be established for initial calibration. Further information on installation and number-plate bracket can be found in the instructions under the "Downloads" tab.
RAPID BIKE's latest technological revolution is an improved version of a popular accessory like the load sensor cell. The new quickshifter unit exchanges information with EVO and RACING modules via CAN-Bus to ensure very precise and timely kill times, thanks to the ability for the engine to immediately resume power after the shift is completed.
This represents a truly innovative solution based on self-learning technology, allowing the shifting process to be reduced to as little as 20 milliseconds while adapting to engine characteristics and riding style. The result is a seamless shifting procedure, increased riding comfort, safer gear changes, and reduced mechanical stress.
A universally applicable accessory that maintains flexibility in handling standard and reverse shift levers. This new element can also be used as a conventional quickshifter to retain the ability to adjust kill timing with a wide range of options available with RAPID BIKE software.
The new RAPID BIKE load sensor cell can be further enhanced in combination with the YOUTUNE controller to adjust the pressure level in real-time for quick shifts.
This represents a truly innovative solution based on self-learning technology, allowing the shifting process to be reduced to as little as 20 milliseconds while adapting to engine characteristics and riding style. The result is a seamless shifting procedure, increased riding comfort, safer gear changes, and reduced mechanical stress.
A universally applicable accessory that maintains flexibility in handling standard and reverse shift levers. This new element can also be used as a conventional quickshifter to retain the ability to adjust kill timing with a wide range of options available with RAPID BIKE software.
The new RAPID BIKE load sensor cell can be further enhanced in combination with the YOUTUNE controller to adjust the pressure level in real-time for quick shifts.
| Manufacturer | Model | Type | Model Year | ccm |
|---|---|---|---|---|
| Yamaha | YZF-R6 | RJ15 | 2008 - 2016 | 600 |
Seller details