Rapid Bike Blipper Kawasaki ZX10R/RR, 2016-2020

€404.00 gross €416.50 UVP brutto

Product number: DS-K27-BLIP-008
ask for delivery time

Product details

Rapid Bike quickshifter blipper, length approx. 45 mm, diameter approx. 14 mm, for Kawasaki ZX10R/RR Ninja Type: ZXT00S / ZXT02E (model year 2016-2020), only for use with Rapid Bike EVO/RACING and standard footrest system, for up and downshifting, for normal and reverse shift patterns, not compatible with RB1, RB2, RB3 modules.

General description

Rapid Bike Blipper
SENSOR WITH LOAD CELL FOR ELECTRONIC QUICKSHIFTER

With the new UP/DOWN SHIFT ASSIST (“Blipper”), Rapid Bike takes a remarkable step fronte thanks to a further technological development.

In conjunction with Rapid Bike EVO and RACING modules, the new Blipper allows control of gear changes during up and downshifting, without having to operate the clutch.

This allows racing enthusiasts even shorter shift times without interrupting power delivery, thus providing more safety while riding and shaving off a tenth of a second or two from lap times.

This shift assistant was developed for vehicles with true Ride By Wire.

The electronics communicate with the EVO or RACING module via Rapid Bike's proprietary CAN-bus wiring harness, controlling the shifting processes. The shift time and the required force to trigger the shifting process can be adjusted driver-specifically as desired in the Rapid Bike software or with the You Tune module. The necessary adjustment of injection during upshifting can even be set gear-selectively. Similarly, the duration of the speed increase during downshifting is adjustable.

The Blipper can be used for both normal and reverse shift patterns.

NOTE: Please note that a connection between the Rapid Bike EVO module and the computer must be established during initial calibration. Further information on installation and number-plate bracket can be found in the instructions in the 'Downloads' tab.
RAPID BIKE's latest technological revolution is an improved version of a popular accessory like the load sensor cell. The new quickshifter unit exchanges information with EVO and RACING modules via CAN-bus to ensure highly accurate and timely kill-time, thanks to the engine's ability to pick up power again immediately after the shift is completed.
This represents a truly innovative solution based on self-learning technology, allowing the shifting process to be reduced to as little as 20 milliseconds, while adapting to engine characteristics and riding style. The result is a seamless shifting procedure, increased riding comfort, safe gear changes, and reduced mechanical stress.
A universally applicable accessory that maintains flexibility in handling standard and reverse shift lever patterns. This new element can also be used as a conventional quickshifter, retaining the possibility of adjusting kill-timing with a wide range of options available with RAPID BIKE software.
The new RAPID BIKE load sensor cell can be further enhanced in combination with the YOUTUNE controller to adjust the pressure level in real-time for rapid gear changes.
Blipper nur in Verbindung mit EVO/RACING möglich!
DS-KRBEVO-124
€460.57
Blipper nur in Verbindung mit EVO/RACING möglich!
DS-KRBRAC-124
€633.71
ManufacturerModelTypeModel YearVariant/VersionHomologationccm
KawasakiZX10R NinjaZXT00S EURO42016 - 2018Racing1000
KawasakiZX10R NinjaZXT02E EURO42019 - 2020Racing1000
KawasakiZX10RR NinjaZXT00S EURO42016 - 2018Racing1000
KawasakiZX10RR NinjaZXT02E EURO42019 - 2020ZXT02EGARacing1000
Seller details