Rapid Bike Blipper Yamaha YZF-R6, 2017-2020

€404.00 gross €339.50 net €416.50 RRP incl. VAT

Product number: DS-K27-BLIP-002

In ca. 7 working days

Product details

Rapid Bike quickshifter blipper, length approx. 45 mm, diameter approx. 14 mm, for Yamaha YZF-R6 Type: RJ27 (model year 2017-2020), only for use with Rapid Bike EVO/RACING and standard footrest system, for up and down shifting, for normal and reverse shifting, not compatible with RB1, RB2, RB3 modules.

General description

Rapid Bike Blipper
LOAD CELL SENSOR FOR THE ELECTRONIC QUICKSHIFTER

With the new UP/DOWN SHIFT ASSIST ('Blipper'), Rapid Bike takes a remarkable step fronte thanks to further technological development.

In conjunction with Rapid Bike EVO and RACING modules, the new Blipper allows control of gear changes when upshifting and downshifting, without having to use the clutch.

This enables race enthusiasts to achieve even shorter shift times without interrupting power transmission, thus providing greater riding safety and saving a few tenths of a second on lap times.

This shift assistant was developed for vehicles with true Ride By Wire.

The electronics communicate with the EVO or RACING module via Rapid Bike's own CAN-Bus wiring harness, thus controlling the shifting operations. The shift time and the force required to trigger the shifting process can be adjusted according to the rider's preferences in the Rapid Bike software or with the You Tune module. The necessary injection adjustment during upshifting can even be set gear-selectively. Likewise, the duration of the speed increase during downshifting is adjustable.

The Blipper can be used with both normal and reverse shift patterns.

NOTE: Please note that a connection between the Rapid Bike EVO module and the computer must be established for the initial calibration. Further information on installation and number-plate bracket can be found in the instructions under the 'Downloads' tab.

Installation and use

Rapid Bike's latest technological revolution is an improved version of a popular accessory such as the load sensor cell. The new quickshifter unit exchanges information with EVO and RACING modules via CAN-Bus to ensure very precise and timely kill-time, thanks to the ability for the engine to immediately re-engage power after the shifting process is complete.
This represents a truly innovative solution based on self-learning technology, which allows the shifting process to be reduced to as little as 20 milliseconds while adapting to engine characteristics and riding style. The result is a seamless shifting procedure, increased riding comfort, safer gear changes, and reduced mechanical stress.
A universally applicable accessory that maintains flexibility in handling standard and reverse shift levers. This new element can also be used as a conventional quickshifter, to retain the ability to adjust kill-timing with a wide range of options available with RAPID BIKE software.
The new RAPID BIKE load sensor cell can be further improved in combination with the YOUTUNE controller to adjust the pressure level in real-time for fast shifting operations.