Rapid Bike Blipper Yamaha YZF-R1, 2016-2019

€404.00 gross €339.50 net €416.50 RRP incl. VAT

Product number: DS-K27-BLIP-002F

In ca. 7 working days

Product Details

Rapid Bike quickshifter blipper, approx. 45 mm length, approx. 14 mm diameter, for Yamaha YZF-R1 Type: RN32 and RN49 (model year 2016-´19), only for use with Rapid Bike EVO/RACING and standard footrest system, for up- and downshifting, for normal and reverse shifting patterns, not compatible with RB1, RB2, RB3 modules.

General Description

Rapid Bike Blipper
LOAD CELL SENSOR FOR THE ELECTRONIC QUICKSHIFTER

With the new UP/DOWN SHIFT ASSIST ("Blipper"), Rapid Bike takes a remarkable step front thanks to further technological development.

In conjunction with Rapid Bike EVO and RACING modules, the new Blipper allows control of gear changes during up- and downshifting without having to operate the clutch.

This allows racing enthusiasts even shorter shift times without interrupting power transmission, thus providing greater riding safety and shaving a few tenths of a second off lap times.

This shift assistant was developed for vehicles with true Ride By Wire.

The electronics communicate with the EVO or RACING module via Rapid Bike's proprietary CAN-Bus wiring harness, thus controlling the shifting processes. The shifting time and the required force to trigger the shifting process can be individually adjusted in the Rapid Bike software or with the You Tune module, according to rider preference. The necessary adjustment of the injection during upshifting can even be gear-specific. Similarly, the duration of the speed increase during downshifting is adjustable.

The Blipper can be used with both normal and reverse shifting patterns.

NOTE: Please note that for initial calibration, a connection must be established between the Rapid Bike EVO module and the computer. Further information on installation and number-plate bracket can be found in the instructions under the "Downloads" tab.

Installation and use

RAPID BIKE's latest technological revolution is an improved version of a popular accessory such as the load sensor cell. The new quick change unit exchanges information with EVO and RACING modules via CAN-Bus to ensure a very precise and timely kill time, thanks to the engine being able to re-engage power immediately after the shifting process is completed.
This represents a truly innovative solution, based on a self-learning technology that allows the shifting process to be reduced to as little as 20 milliseconds, while adapting to engine characteristics and riding style. The result is a seamless shifting procedure, increased riding comfort, safe gear changes, and reduced mechanical stress.
A universally applicable accessory that maintains flexibility in handling standard and inverted shift lever. This new element can also be used as a conventional quickshifter, to retain the ability to adjust kill timing with a wide range of options available with RAPID BIKE software.
The new RAPID BIKE load sensor cell can be further enhanced in combination with the YOUTUNE controller to adjust the pressure level in real-time for rapid gear changes.