Rapid Bike Blipper Suzuki GSX-R1000(R), 2017-2020

€404.00 gross €416.50 UVP brutto

Product number: DS-K27-BLIP-001
Available immediately

Product details

Rapid Bike quickshifter blipper, length approx. 45 mm, diameter approx. 14 mm, for Suzuki GSX-R1000(R) Type: DM and WDM0 (model year 2017-2020), only for use with Rapid Bike EVO/RACING and standard footrest system, for upshifting and downshifting, for normal and reverse shift patterns, not compatible with RB1, RB2, RB3 modules

General description

Rapid Bike Blipper
LOAD CELL SENSOR FOR THE ELECTRONIC QUICKSHIFTER

With the new UP/DOWN SHIFT ASSIST (Blipper), Rapid Bike takes a remarkable step fronte thanks to further technological development.

In conjunction with Rapid Bike EVO and RACING modules, the new blipper allows control of gear changes during upshifting and downshifting, without having to use the clutch.

This allows racing enthusiasts even shorter shift times without interrupting power delivery, thus providing more safety while riding and shaving off a tenth of a second or two from lap times.

This shift assistant was developed for vehicles with true ride-by-wire.

The electronics communicate with the EVO or RACING module via Rapid Bike's proprietary CAN-bus wiring harness, controlling the shifting processes. The shift time and the force required to trigger the shift can be individually adjusted in the Rapid Bike software or with the You Tune module, according to the rider's preference. The necessary injection adjustment during upshifts can even be gear-selectively set. Likewise, the duration of the speed increase during downshifts is adjustable.

The blipper can be used with both normal and reverse shift patterns.

NOTE: Please note that a connection between the Rapid Bike EVO module and the computer must be established for initial calibration. Further information on installation and number-plate bracket can be found in the instructions under the "Downloads" tab.
RAPID BIKE's latest technological revolution is an improved version of a popular accessory like the load cell sensor.
The new quick-shift unit exchanges information with EVO and RACING modules via CAN-bus to ensure highly precise and timely kill-time, thanks to the engine being re-ignited immediately after the shift is completed.
This represents a truly innovative solution based on self-learning technology, allowing the shifting process to be reduced to as little as 20 milliseconds while adapting to engine characteristics and riding style. The result is a seamless shifting procedure, increased riding comfort, safer gear changes, and reduced mechanical stress.
A universally applicable accessory that maintains flexibility in handling standard and inverted shift lever patterns. This new element can also be used as a conventional quick shifter, retaining the ability to adjust kill-timing with a wide range of options available in RAPID BIKE software.
The new RAPID BIKE load cell sensor can be further enhanced in combination with the YOUTUNE controller to adjust pressure levels in real-time for rapid gear changes.
Blipper nur in Verbindung mit EVO/RACING möglich!
DS-KRBEVO-131
€460.57
Blipper nur in Verbindung mit EVO/RACING möglich!
DS-KRBRAC-131
€633.71
ManufacturerModelTypeModel YearVariant/VersionNoteHomologationccm
SuzukiGSX-R1000WDM0 EURO42017 - 2017standard adjustment without gear sensorRacing1000
SuzukiGSX-R1000WDM0 EURO42018 - 2020standard adjustment without gear sensorRacing1000
SuzukiGSX-R1000RWDM0 EURO42017 - 2017DM11Gstandard adjustment without gear sensorRacing1000
SuzukiGSX-R1000RWDM0 EURO42018 - 2020DM11Gstandard adjustment without gear sensorRacing1000
Seller details