Rapid Bike Blipper Moto Guzzi V85 TT, 2019-2022

€404.00 gross €339.50 net €416.50 UVP brutto

Product number: DS-K27-BLIP-012

ask for delivery time

Product details

Rapid Bike quickshifter blipper, length approx. 45 mm, diameter approx. 14 mm, for Moto Guzzi V85 TT Type: KW / KY (model year 2019-2022), for use with Rapid Bike EVO/RACING and standard footrest system, for upshifting and downshifting, for standard and reverse shift patterns, not compatible with RB1, RB2, RB3 modules.

General description

Rapid Bike Blipper
LOAD CELL SENSOR FOR THE ELECTRONIC QUICKSHIFTER

With the new UP/DOWN SHIFT ASSIST (“Blipper”), Rapid Bike takes a remarkable step front thanks to a further technological development.

In conjunction with Rapid Bike EVO and RACING modules, the new Blipper allows control of gear changes during both upshifting and downshifting, without having to operate the clutch.

This enables racing enthusiasts to achieve even shorter shift times without interrupting power delivery, thus enhancing riding safety and shaving a few tenths of a second off their lap times.

This shift assistant was developed for vehicles with true Ride By Wire.

The electronics communicate via Rapid Bike's proprietary CAN-bus wiring harness with the EVO or RACING module, thereby controlling the gear changes. The shift time and the force required to initiate the gear change can be adjusted according to rider preference in the Rapid Bike software or with the You Tune module. The necessary injection adjustment during upshifting can even be set gear-selectively. Likewise, the duration of the speed increase during downshifting is adjustable.

The Blipper can be used with both standard and reverse shift patterns.

NOTE: Please note that for initial calibration, a connection must be established between the Rapid Bike EVO module and the computer.

RAPID BIKE's latest technological revolution is an improved version of a popular accessory such as the load sensor cell. The new quick-shift unit exchanges information with EVO and RACING modules via CAN-bus to ensure highly accurate and timely kill-time, thanks to the possibility of the engine re-engaging immediately after the gear change is completed.
This represents a truly innovative solution based on self-learning technology, allowing the gear change process to be reduced to as little as 20 milliseconds, while adapting to engine characteristics and riding style. The result is a seamless shifting procedure, increased riding comfort, safe gear changes, and reduced mechanical stress.
A universally applicable accessory that maintains flexibility in handling standard and reverse shift lever patterns. This new element can also be used as a conventional quickshifter, retaining the possibility of adjusting kill-timing with a wide range of options available with RAPID BIKE software.
The new RAPID BIKE load sensor cell can be further enhanced in combination with the YOUTUNE controller to adjust the pressure level in real-time for fast gear changes.