LSL Universal Handlebar Clamp Kit, Screw Length 70 mm, for 22.2 mm handlebar, Silver

Product details

LSL Universal handlebar clamp kit, screw length 70 mm, for 22.2 mm handlebar, silver

General description

Universal handlebar clamps for handlebar-Ø22.2 mm
For using handlebar with a clamping diameter of 22.2 mm, LSL offers clamps for mounting in the original fastening points of the upper triple clamp. The clamps are CNC-milled from high-quality solid aluminium material. They replace the standard clamps to achieve a better aesthetic. They can be mounted in the original fastening points with centrally located M10 x 1.25 mm screws. For models with rubber mounts, these are retained.
Note:
Please check if your vehicle is listed in the ABE and determine the required screw length.
Attention:
This item is only exempt from registration if your motorcycle is assigned to the KM3 clamp in the enclosed ABE and all conditions are observed.
For vehicles not listed in the model list, approval by inspection in accordance with § 19(2) StVZO is possible.
How to determine the screw length:
Measure the length of the original screws that protrude from the original clamps. This is the usable screw length L, as shown in the technical sketch.

Select the desired colour and required screw length.
Material: Aluminium
Material treatment: CNC-milled, anodised
Fastening: Central screwing to the standard mounting points M10 x 1.25 mm
Clamp KM3: 35 mm high
Dimensions: 7/8 inch clamping, for Ø 22.2mm handlebar
Scope of delivery:
• Clamps (KM3) 1 pair
• Screws M8x25 4 pieces
• Screws M10x1.25 2 pieces in the selected length
• U-washers M10 2 pieces
• Nuts M10x1.25 (self-locking) 2 pieces