LSL Universal Handlebar Clamp Kit 28.6 mm, 45 mm, M10x1.25, black

Product details

LSL Universal Handlebar Clamp Kit 28.6 mm, 45 mm, M10x1.25, black

General description

X-Bar universal handlebar clamps
For the use of X-Bar-handlebars (28.6 mm), LSL offers the necessary clamp blocks for bolting into the original mounting points of the upper triple clamps. The clamp blocks are CNC-milled from high-quality solid aluminium. They replace the standard clamp blocks to achieve a different height and a better appearance. They can be mounted in the original mounting points with centrally located M10 x 1.25 mm screws. For models with rubber mounting, this is retained.
Note:
Please check if your vehicle is listed in the ABE and determine the required screw length.
Attention:
This item is only registration-free if your motorcycle is assigned to the clamp block KM45/KG45 in the enclosed ABE and all conditions are observed.
For vehicles not listed in the model list, approval by inspection in accordance with § 19(2) StVZO is possible.
How to determine the screw length:
Measure the length of the original screws by which they protrude from the original clamp blocks. If applicable, add the thickness of the chosen washer.
Otherwise, simply choose L = (the measured dimension).
Matching rise by 15 or 25 mm: 127UN0...
ATTENTION! For motorcycles with fixed 22.2 mm handlebar mounts, please use adapter part no. 127RK25...
Material: Aluminium
Material treatment: CNC-milled, anodised
Mounting: Central bolting to the standard mounting points with M10x1.25mm screws
Clamp block KM45: Bottom edge of clamp block to centre of handlebar 45 mm
Dimensions: 28.6 mm clamping, for handlebar with a Ø of 28.6 mm
Scope of delivery:
• Clamp blocks (KM45) 1 pair
• Screws M8x25 4 pieces
• Screws M10x1.25 2 pieces in the chosen length
• U-washer M10 2 pieces
• Nuts M10x1.25 (self-locking) 2 pieces