LSL Universal Clamp Kit 22.2 mm

Product Details

LSL Universal Clamp Kit, screw length 45 mm, for 22.2 mm handlebar, black

General Description

Universal clamps for handlebar-Ø22.2 mm

For the use of handlebar with a clamping diameter of 22.2 mm, LSL offers clamps for screwing into the original mounting points of the upper triple clamps. The clamps are CNC-milled from high-quality solid aluminium. They replace the standard clamps to achieve a better aesthetic. They can be mounted in the original mounting points with centrally located M10 x 1.25 mm screws. For models with rubber mounts, these are retained.

Note:
Please check if your vehicle is listed in the ABE and determine the required screw length.

Attention:
This item is only exempt from registration if your motorcycle is assigned to clamp KM3 in the enclosed ABE and all conditions are met.
For vehicles not listed in the model list, approval through acceptance according to § 19(2) StVZO is possible.

How to determine the screw length:
Measure the length of the original screws that protrude from the original clamps. This is the usable screw length L, as shown in the technical sketch.

Select the desired colour and required screw length.

Material: Aluminium
Material treatment: CNC-milled, anodised
Mounting: Central screw connection at the standard mounting points M10 x 1.25 mm
Clamp KM3: 35 mm high
Dimensions: 7/8 inch clamping, for Ø 22.2mm handlebar

Scope of delivery:
• Clamps (KM3) 1 pair
• Screws M8x25 4 pieces
• Screws M10x1.25 2 pieces in the selected length
• U-washern M10 2 pieces
• Nuts M10x1.25 (self-locking) 2 pieces