LSL Universal Clamp Block Kit 28.6 mm, Screw Length 50 mm, black

Product details

LSL Universal Clamp Block Kit 28.6 mm, Screw Length 50 mm, black

General description

X-Bar universal clamp blocks
For the use of X-Bar-handlebars (28.6 mm), LSL offers the necessary clamp blocks for screwing into the original mounting points of the upper triple clamps. The clamp blocks are CNC-milled from high-quality solid aluminium. They replace the standard clamp blocks to achieve a different height and a better appearance. They can be mounted in the original mounting points with centrally located M10 x 1.25 mm screws. For models with rubber mounting, this is retained.
Note:
Please check whether your vehicle is listed in the ABE and determine the required screw length.
Attention:
This item is only exempt from registration if your motorcycle is assigned to clamp block KM45/KG45 in the enclosed ABE and all conditions are observed.
For vehicles not listed in the model list, approval by inspection in accordance with § 19(2) StVZO is possible.
How to determine the screw length:
Measure the length of the original screws, by which they protrude from the original clamp blocks. Then, if applicable, add the thickness of the chosen washer/spacer.
Otherwise, simply select L = (the measured dimension).
Suitable rise by 15 or 25 mm: 127UN0...
ATTENTION! For motorcycles with a permanently cast 22.2 mm handlebar mount, please use adapter part no. 127RK25...
Material: Aluminium
Material treatment: CNC-milled, anodised
Mounting: central screw connection at the standard mounting points with M10x1.25mm screws
Clamp block KM45: bottom edge of clamp block to centre of handlebar 45 mm
Dimensions: 28.6 mm clamping, for handlebar with a Ø of 28.6 mm
Scope of delivery:
• Clamp blocks (KM45) 1 pair
• M8x25 screws 4 pieces
• M10x1.25 screws 2 pieces in the selected length
• U-washers M10 2 pieces
• M10x1.25 nuts (self-locking) 2 pieces