LSL Tour-Match Kit for Triumph Daytona T595 / 955 i 97-01
€349.00 gross
Article number:
LSL-150T014
Product Details
LSL Tour-Match Kit, with component certificate, for Triumph Daytona T595 / 955 i, Type , model year 97-01, with mounting kit, 50 mm rise offset, 25 mm pull-back offset.General Description
Like no other clip-on handlebars, this design, patented in the early 90s, places the handlebar tube in a comfortable and relaxed position. The moderate handlebar tube angle of 1° relieves the wrists, while the unchanged handlebar width prevents widely-splayed elbows in the wind. The clamps are machined from a single piece of high-strength aluminium. This results in an extremely break-resistant design without weak points due to component connections.As new brake or clutch lines may need to be fitted depending on the vehicle model, please contact us by phone or email for advice regarding the conversion and consult a specialist workshop near you.
The following items match this product: handlebar weights / grips / mounts brake fluid reservoir / drilling template / handlebar extension
Care instructions:
• For all handlebar and their surface finishes, only use acid-free and alkali-free cleaner!
• Never apply in direct sunlight and do not allow the cleaner to dry.
• Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc.; immediately wipe up any drips with a soft cloth.
• Before application cleaning agents, test compatibility in an inconspicuous area!
• No guarantee or warranty for improper cleaning and care.
| Manufacturer | Model | Type | Model Year | Homologation | ccm |
|---|---|---|---|---|---|
| Triumph | Daytona 955i | 595N | 2002 - 2005 | TGA | 955 |
Seller information