LSL Tour-Match Kit for KTM RC8 08-
€419.00 gross
Article number:
LSL-150KT09
Product Details
LSL Tour-Match Kit, with component approval certificate, for KTM RC8, Type, Model Year 08-, with mounting kit, offset higher by 30 mm, closer by 10 mm.General Description
Like no other handlebar clip-on, the design patented back in the early 90s positions the handlebar tube for a comfortable and relaxed posture. The moderate handlebar tube angle of 1° relieves the wrists, while the unchanged handlebar width prevents elbows from hanging wide in the wind. The clamps are machined from a single piece of high-strength aluminium, resulting in an extremely break-proof construction without weak points due to component connections.Since new brake or clutch lines may need to be installed depending on the vehicle model, please contact us by phone or email for advice on the conversion and consult a specialist workshop near you.
The following items are compatible with this product: handlebar weights / grips / brake fluid reservoir mounts / drilling template / handlebar extension
Care instructions:
• For all handlebars and their surface variants, only use acid- and alkali-free cleaners!
• Never apply in direct sunlight and do not allow the cleaner to dry.
• Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc. Immediately wipe off any drips with a soft cloth.
• Before application cleaning agents, test compatibility in an inconspicuous area!
• No warranty or guarantee for improper cleaning and care.
| Manufacturer | Model | Type | Model Year | Homologation | ccm |
|---|---|---|---|---|---|
| KTM | 1190 RC8 | KTMRC8 | 2008 - 2010 | TGA | 1190 |
| KTM | 1190 RC8 R | KTMRC8 | 2009 - 2015 | TGA | 1190 |
Seller information