LSL Riser Kit 28.6 mm for Triumph Speed Triple, -2010, silver

Product Details

LSL Riser Kit 28.6 mm for Triumph Speed Triple, model year -2010, silver

General Description

X-Bar risers (identification KM45) silver for 28.6 mm handlebar
suitable for the following vehicle:
Triumph
Speed Triple up to model year 10
Material: Aluminium
Material treatment: anodised
Mounting: + 3 mm
Dimensions: 28.6 mm clamp
Our model-specific X-Bar risers are mounted at the original mounting points. This allows many models with original 22.2mm-handlebar to be equipped with an X-Bar handlebar mount, fit, assemble.
For models with standard rubber mounting, this is retained. Depending on the model, the handlebar position changes from -50mm to +30mm; the value for your motorcycle is specified under offset.
ATTENTION IMPORTANT NOTE: Please check before conversion whether the vehicle intended for the conversion is listed in the attached ABE!
For each vehicle, there are different prerequisites and conditions that allow a conversion of the risers.
The model assignments of the LSL risers listed in the ABE are tested for use with the vehicle's standard handlebar.
The additional use of an LSL accessory handlebar is possible but may require additional changes to the vehicle (longer lines or cables) due to a different handlebar shape.
An increase in the original handlebar can also lead to additional changes to the vehicle.
Check whether the following conditions apply to your vehicle (– see ABE):
- Use permitted when an equalising shim for the triple clamp is used
- Use permitted with a 20 mm longer brake line
- Use permitted with a 30 mm longer brake line
- Use permitted with an LSL instrument holder
Failure to comply will invalidate the vehicle's operating permit!
The following items match this product: 28.6 mm-handlebar X-Bar