LSL handlebar-Rise-Up Ø22.2

Product Details

++++++++++Item with mounting marks++++++++++

LSL handlebar-Rise-Up 25 mm, black

General Description

handlebar-Rise-Up Ø22.2
handlebar risers RiseUp, black or silver, for 7/8 inch handlebar (Ø22.2 mm). The handlebar position is moved upwards and 17 mm closer to the rider. This provides a more upright and relaxed seating position, with a General Operating Permit (ABE), set.

LSL handlebar risers RiseUp for 7/8 inch handlebar

Clamp risers that are installed into the standard clamps. By using the milled spacer clamps, the handlebar position is moved upwards and closer to the rider. This results in a significantly more upright and relaxed seating position.

- Material: Aluminium
- Material treatment: CNC-milled, anodised
- Offset: 25 mm or 35 mm higher, 17 mm closer to the rider
- Mounting: For all motorcycles with 32-35 mm hole spacing and 7/8 inch handlebar (Ø22.2mm)
- Available in Black or Silver
- With ABE* for many models

Scope of delivery: 1 set, iincluding mounting screws and parts certificate.

ATTENTION IMPORTANT NOTE:
Before conversion, please check whether the vehicle intended for the conversion is listed in the attached General Operating Permit (ABE)!
There are different prerequisites and conditions for each vehicle that allow the conversion of the clamp risers.

*The model assignments of the LSL clamp risers listed in the ABE are tested for use with the vehicle's standard handlebars.
The additional use of an LSL accessory handlebar is possible, but due to a different shape of the handlebar, it may require additional modifications to the vehicle (longer cables or lines).
Raising the original handlebar can also lead to additional modifications to the vehicle.

Check if the following conditions apply to your vehicle (– see ABE):
- Use permitted with an equaliser shim for the triple clamp
- Use permitted with 20 mm longer brake line
- Use permitted with 30 mm longer brake line
- Use permitted with LSL instrument holder

Failure to comply will invalidate the vehicle's operating permit!

Conversion should only be carried out by trained specialist personnel.