LSL Handlebar Clamp Kit for Triumph Bonneville, Thruxton, 2008-, for 1 inch-handlebar, high, black

Product Details

LSL Handlebar Clamp Kit for Triumph Bonneville, Thruxton, model year 2008-, for 1 inch-handlebar, high, black

General Description

Handlebar clamps (ID KC45) for inch handlebar
suitable for the following vehicles:
Triumph
Bonneville
Thruxton
Material: Aluminium
Material treatment: anodised
Mounting: between the original clamps
Offset: + 35 mm or - 5 mm
Dimensions: 1 inch clamping
Our model-specific handlebar clamps are mounted at the original mounting points.
For models with standard rubber mounting, this is retained. Depending on the model, the handlebar position changes from -50mm to +30mm; the value for your motorcycle is specified under offset.
ATTENTION IMPORTANT NOTE: Please check before conversion whether the vehicle intended for conversion is listed in the attached ABE!
For each vehicle, there are different prerequisites and requirements that allow for the conversion of the handlebar clamps.
The model assignments of the LSL handlebar clamps listed in the ABE are tested for use with the vehicle's standard handlebar.
Additional use of an LSL accessory handlebar is possible but may require additional changes to the vehicle (longer lines or cables) due to a different shape of the handlebar.
Even raising the original handlebar can lead to additional changes to the vehicle.
Check if the following conditions apply to your vehicle (see ABE):
- Use permitted when using a compensating shim for the triple clamp
- Use permitted with a 20 mm longer brake line
- Use permitted with a 30 mm longer brake line
- Use permitted with LSL instrument holder
Failure to comply will invalidate the operating permit for the vehicle!
The following items match this product: Inch handlebar