LSL Handlebar Clamp Kit 28.6/65mm, Black

Product Details

LSL Universal Handlebar Clamp Kit 28.6 mm, screw length 65 mm, black

General Description

X-Bar Universal Handlebar Clamps

For the use of X-Bar handlebars (28.6 mm), LSL offers the necessary handlebar clamps for mounting in the original mounting points of the upper triple clamps. The handlebar clamps are CNC-milled from high-quality solid aluminium. They replace the standard handlebar clamps to achieve a different height and a better appearance. They can be mounted in the original mounting points with centrally located M10 x 1.25 mm screws. For models with rubber mounts, these are retained.

Note:
Please check whether your vehicle is listed in the ABE and determine the required screw length.

Attention:
This item is only registration-free if your motorcycle is assigned to the handlebar clamp KM45/KG45 in the accompanying ABE and all conditions are observed.
For vehicles not listed in the model list, approval by inspection in accordance with § 19(2) StVZO is possible.

How to determine the screw length:
Measure the length of the original screws, by how much they protrude from the original handlebar clamps. Then add the thickness of the chosen washer/shim if applicable.
Otherwise, simply select L = (the measured dimension).

Suitable rise by 15 or 25 mm: 127UN0...

ATTENTION! For motorcycles with a permanently cast 22.2 mm handlebar mount, please use adapters item no. 127RK25...

Material: Aluminium
Material treatment: CNC-milled, anodised
Mounting: central screw connection at the standard mounting points with M10x1.25mm screws
Handlebar clamp KM45: bottom edge of clamp to centre of handlebar 45 mm
Dimensions: 28.6 mm clamping, for handlebar with a Ø of 28.6 mm

Scope of delivery:
• Handlebar clamps (KM45) 1 pair
• Screws M8x25 4 pieces
• Screws M10x1.25 2 pieces in the selected length
• U-washers M10 2 pieces
• Nuts M10x1.25 (self-locking) 2 pieces