LSL CLUBMAN handlebar LS1, Steel, 1 inch, black

Product details

LSL CLUBMAN handlebar LS1, Steel, 1 inch, black

General description

LSL steel handlebar in 1 inch

LSL stands for excellent handlebar quality. This naturally also applies to the wide and heavy versions of the inch handlebar.

LSL handlebar are made from high-quality steel with a large wall thickness and are characterised by exceptional dimensional stability and reduced vibration tendencies.

In addition to classic shapes, LSL also offers sporty handlebar variants in 25.4mm.

With a continuous outer diameter of 25.4mm, the wall thickness of the handlebar is 3mm (inner 19.4mm). The surface is highly polished and chrome-plated, or black KTL-coated.

The handlebar are supplied without holes for the anti-rotation device of the switchgear. To best transfer the position of the holes from the stock handlebars, recommend using the LSL drilling template.

For use on Harley models, a version with an indented recess for cable routing (H-D groove) is offered.

All LSL handlebar are supplied with ABE.

The model range is huge and is expanded with new entries every year.

The ABE reliably documents which handlebar type fits and is approved for the motorcycle.

Generally, the assignments in the ABE are without conditions.

However, there are exceptions.

Therefore, check the entry for your motorcycle in the ABE.

If you do not find your vehicle in the ABE, the ABE can be used as accompanying documentation for an individual inspection.

Scope of delivery: 1 piece

Care instructions:

• For all handlebar and their surface variants, use only acid- and alkali-free cleaners!

• Never apply in direct sunlight and do not allow the cleaner to dry.

• Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc. Immediately wipe off any drips with a soft cloth.

• Before application cleaning agents, test their compatibility in an inconspicuous area!

• No guarantee or warranty in case of improper cleaning and care.