LSL Clamp Block Kit for Triumph Bonneville, Thruxton, 2008-, for 1 inch handlebar, high, silver

Product Details

LSL clamp block kit for Triumph Bonneville, Thruxton, model year 2008-, for 1 inch handlebar, high, silver

General Description

Clamp blocks (identification KC45) for inch handlebar
suitable for the following vehicles:
Triumph
Bonneville
Thruxton
Material: Aluminium
Material treatment: anodised
Mounting: between the original clamps
Offset: + 35 mm or - 5 mm
Dimensions: 1 inch clamping
Our model-specific clamp blocks are mounted on the original mounting points.
For models with standard rubber mounting, this is retained. Depending on the model, the handlebar position changes from -50mm to +30mm; the value for your motorcycle is given under offset.
ATTENTION IMPORTANT NOTE: Please check before conversion whether the vehicle intended for conversion is listed in the attached ABE!
For each vehicle, there are different prerequisites and requirements that allow a conversion of the clamp blocks.
The model assignments of the LSL clamp blocks listed in the ABE are tested for use with the vehicle's standard handlebar.
The additional use of an LSL accessory handlebar is possible but may require additional changes to the vehicle (longer lines or cables) due to a different shape of the handlebar.
Raising the original handlebar can also lead to additional changes to the vehicle.
Check if the following requirements apply to your vehicle (-see ABE):
- Use permitted when using a compensation shim for the triple clamp
- Use permitted with 20 mm longer brake line
- Use permitted with 30 mm longer brake line
- Use permitted with LSL instrument holder
Failure to comply will invalidate the vehicle's operating permit!
The following items are suitable for this product: inch handlebar