LSL Aluminium handlebar Drag Bar AD 2.4 LL, 1 inch, matt black

Product details

LSL Aluminium handlebar Drag Bar AD 2.4 LL, 1 inch, 25.4mm diameter, colour matt black,
Width 846mm, Depth 101mm, Wall thickness 4mm, Clamping area 180mm, Grip tube length 260mm

General description

1 inch (25.4mm) aluminium handlebar from LSL

LSL stands for excellent handlebar quality. This is due to the company's own selection of materials and material treatment, as well as the manufacturing quality of its handlebars, which has been optimised over decades.

As the only handlebar manufacturer in Europe, LSL also offers variants with a 25.4mm (1-inch) outer diameter in its aluminium handlebar range. LSL thus covers the demand for sporty handlebar types. These handlebars are internally reinforced in the clamping area and achieve extraordinary rigidity despite the low weight typical of aluminium.

With a continuous outer diameter of 25.4mm, the wall thickness at the handlebar ends is 4mm (17.4mm internally). The surface is matt bead-blasted or highly polished and, depending on the handlebar type, available in various anodised colours.

The handlebars are supplied without holes for the anti-rotation device of the switch fittings. To best transfer the position of the holes from the standard handlebar, we recommend to use an LSL drilling template.

All LSL handlebars are supplied with ABE.
The range of models is huge and is expanded with new entries every year.
The ABE reliably documents which handlebar type fits and is approved for the motorcycle.

Generally, the assignments in the ABE are without conditions.
However, there are exceptions.
Therefore, please refer to the entry for your motorcycle in the ABE.
If you cannot find your vehicle in the ABE, the ABE can be used as accompanying documentation for an individual inspection.

Scope of delivery: 1 piece

Care instructions:
• For all handlebars and their surface variants, only use acid- and alkali-free cleaners!
• Never apply in direct sunlight and do not allow the cleaner to dry.
• Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles etc., immediately wipe up any drips with a soft cloth.
• Before application cleaning agents, test compatibility in an inconspicuous area!
• No guarantee or warranty for improper cleaning and care.