LSL Aluminium-handlebar CLUBMAN® AS1.4 LL, 1 inch, gold

Product details

LSL 1 inch handlebar CLUBMAN® AS1 with slotted hole for internal cable routing, gold

General description

LSL stands for outstanding handlebar quality. This is due to the company's own selection of materials and material treatment, as well as the manufacturing quality of the handlebars, which has been optimised over decades.
As the only handlebar manufacturer in Europe, LSL also offers variants with a 25.4mm outer diameter (1-inch) in its aluminium handlebar range. LSL thus meets the demand for sporty handlebar types. These handlebars are internally reinforced in the clamping area and achieve exceptional rigidity despite their typical aluminium low weight.
With a continuous outer diameter of 25.4mm, the wall thickness at the handlebar ends is 4 mm (17.4mm internally). The surface is matt bead-blasted or high-gloss polished and available in various anodised colours depending on the handlebar type.
The handlebars are supplied without holes for anti-rotation of the switch fittings.
To best transfer the position of the holes from the stock handlebar, we recommend using an LSL drilling template.
All LSL handlebars are supplied with an ABE (General Operating Permit).
The range of models is huge and is expanded with new entries every year.
The ABE reliably documents which handlebar type fits and is approved for the motorcycle.
Generally, the assignments in the ABE are without conditions.
However, there are exceptions.
Therefore, refer to the entry for your motorcycle in the ABE.
Should you not find your vehicle in the ABE, the ABE can be used as a supporting document for individual approval.
Scope of delivery: 1 piece
Care instructions:
• For all handlebars and their surface variants, use only acid- and alkali-free cleaners!
• Never apply in direct sunlight and do not allow the cleaner to dry.
• Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc.; immediately wipe up any drips with a soft cloth.
• Before application of cleaning agents, test compatibility in an inconspicuous area!
• No guarantee or warranty for improper cleaning and care.