LSL Alu-handlebar Drag Bar AD 2.1, 1 inch, matt black

Product details

LSL Alu-handlebar Drag Bar AD 2.1, 1 inch, 25.4mm diameter, matt black colour,
width 846mm, depth 101mm, wall thickness 4mm, clamping area 180mm, grip tube length 260mm

General description

1 inch (25.4mm) Alu-handlebar from LSL

LSL stands for excellent handlebar quality. This is due to the company's own selection of materials and material treatment, as well as the handlebar manufacturing quality optimised over decades.

As the only handlebar producer in Europe, LSL also offers variants with a 25.4mm outer diameter (1-inch) in its Alu-handlebar range. LSL thus covers the demand for sporty handlebar types. These handlebar are internally reinforced in the clamping area and achieve exceptional rigidity despite the low, aluminium-typical weight.

With a continuous outer diameter of 25.4mm, the wall thickness at the handlebar ends is 4 mm (17.4mm internally). The surface is matt bead-blasted or high-gloss polished and available in various anodised colours depending on the handlebar type.

The handlebar are supplied without holes for the anti-rotation device of the switch fittings.
To best transfer the position of the holes from the standard handlebars, we recommend using an LSL drilling template.

All LSL-handlebar are supplied with ABE.
The model range is huge and is expanded with new entries every year.
The ABE reliably documents which handlebar type fits and is approved for the motorcycle.

Generally, the assignments in the ABE are without conditions.
However, there are exceptions.
Therefore, check the entry for your motorcycle in the ABE.
If you do not find your vehicle in the ABE, the ABE can be used as a supporting document for individual approval.

Scope of delivery: 1 piece

Care instructions:
• For all handlebar and their surface variants, use only acid- and alkali-free cleaners!
• Never use in direct sunlight and do not allow the cleaner to dry.
• Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc.; immediately wipe up any drips with a soft cloth.
• Before application cleaning agents, test compatibility in an inconspicuous area!
• No guarantee or warranty for improper cleaning and care.