Ilmberger Carbon Sprocket Cover, Glossy, Ducati Streetfighter V2, 2022-

Product Details

Ilmberger Carbon Sprocket Cover, glossy carbon, with ABE, for Ducati Streetfighter V2, model year 2022-

General Description

The sprocket cover is one of the most underestimated components on the entire motorcycle. Centrally mounted on the motorcycle, it surrounds the engine sprocket and does more than it might seem at first glance. It protects the engine and many other components from flying chain grease during riding. This dirt is particularly stubborn and is difficult to remove from the soft surface of the original part. A hard surface, as found in high-quality carbon, is better suited here.

But the component can exploit its full potential not only technically but also visually. Installed in just a few minutes, the value of the motorcycle is enormously increased once again. To achieve a particularly harmonious overall appearance, the fibre layers are laid and aligned in the mould by experts. This allows the carbon part to perfectly fit into the surrounding shapes of the motorcycle. The more of our parts are installed and combined, the more overwhelming the result.
For our carbon, we exclusively use prepreg fabric produced specifically for this purpose, which is also used in a similar form in Formula 1 and aerospace. The material, elaborately laminated by hand and cured in several stages in an autoclave, impresses not only with its unique appearance but also with its unique technical properties. For the same volume, it has three times the specific stiffness of steel and, at the same time, due to its particularly low density, only a breakage of its weight. These properties are particularly pronounced in our products due to the high fibre volume content.
To optimally protect this high-quality material from all kinds of environmental influencess, we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear lacquer, this provides an an unprecedented and unique deep effect, which particularly highlights the high quality of the material.
So that not only riding but also wrenching is a pleasure, we use only the original mounting points for this part.

The facts:

- with ABE – no additional registration required
- sealing of all surfaces (inside and outside) by unique plastic coating for protection against environmental influences of all kinds
- additional glossy clear lacquer finish on all visible surfaces
- optimally protected against UV light
- delivered ready for installation
- TÜV certified quality
- made from prepreg material specially produced for Ilmberger
- manufactured according to ISO 9001 in our own production
- installation using the original mounting points
- quick and easy assembly