Ilmberger Carbon Pillion Heel Guard right side R/S Gloss for Aprilia RSV4 / Tuono V4 2021-

Product details

Ilmberger carbon pillion heel guard right side R/S gloss, with ABE for Aprilia
RSV4, from model year 2021-
Tuono V4, from model year 2021-

General description

The carbon heel guard allows for a special expression of attention to detail. This carbon part replaces the original component using the original mounting points.

Through the combination of elegant curves and sharp edges, the carbon exhaust heat protector nestles into the modern lines of the new Aprilia like no other. But it offers many advantages not only visually, but also technically. High-quality carbon conducts heat significantly slower than the materials of the original part would. This keeps the outside noticeably cooler in comparison and better protects the foot from burns.
To achieve a particularly harmonious overall appearance, the fibre layers are expertly laid into the mould and aligned. This way, the carbon part perfectly integrates with the surrounding shapes of the motorcycle. The more of our parts that are installed and combined, the more stunning the result.
Only prepreg fabric produced specifically for this purpose, which is also used in a similar form in Formula 1 and aerospace, is used for the carbon. The material, elaborately laminated by hand and cured in several stages in an autoclave, convinces not only with a unique appearance but also with its exceptional technical properties. For the same volume, it possesses three times the specific stiffness of steel and, at the same time, due to its particularly low density, only a breakage of its weight. These properties are particularly pronounced with us due to the high fibre volume content.
To optimally protect this high-quality material from all kinds of influences from the environment, Ilmberger Carbon, as the only carbon manufacturer worldwide, uses a specially developed plastic coating on all surfaces. In combination with clear lacquer, this creates an unprecedented and unique depth effect, which particularly highlights the high quality of the material.
To make not only riding but also fitting a pleasure, only the original mounting points are used for this part.

The facts:
- With General Operating Permit (ABE)
- Sealing of all surfaces (inside and outside) with a unique plastic coating for protection against environmental influences of all kinds
- additional high-gloss clear lacquer finish on all visible surfaces
- optimally protected against UV light
- Supplied ready for installation
- TÜV certified quality
- Made from prepreg material specially produced for Ilmberger
- Manufactured in-house according to ISO 9001
- Installation using the original mounting points
- Fast and easy installation