Ilmberger Carbon Pillion Heel Guard left side L/S Gloss for Aprilia RSV4 / Tuono V4 2021-

Product Details

Ilmberger Carbon pillion heel guard left side L/S gloss, with ABE for Aprilia
RSV4, from model year 2021-
Tuono V4, from model year 2021-

General Description

The carbon heel guard allows for a special expression of love for detail. The carbon part replaces the original component using the original mounting points.

With its combination of elegant curves and sharp edges, the carbon exhaust heat protector blends seamlessly into the modern lines of the new Aprilia. It offers many advantages, not only visually but also technically. High-quality carbon conducts heat significantly slower than the materials of the original part. This keeps the outside noticeably cooler by comparison and better protects the foot from burns.
To achieve a particularly harmonious overall appearance, the fibre layers are expertly laid and aligned in the mould. This ensures the carbon part perfectly integrates into the surrounding shapes of the motorcycle. The more of our parts that are installed and combined, the more impressive the result.
Exclusively for this carbon part, specially produced prepreg fabric is used, which is also utilised in a similar form in Formula 1 and aerospace. The material, laminated with elaborate craftsmanship and cured in several stages in an autoclave, impresses not only with a unique appearance but also with its exceptional technical properties. For the same volume, it has three times the specific stiffness of steel and, due to its particularly low density, only a breakage of its weight. These properties are particularly pronounced in our products due to the high fibre volume content.
To optimally protect this high-quality material from all types of environmental influencess, Ilmberger Carbon, as the only carbon manufacturer worldwide, uses a specially developed plastic coating on all surfaces. This, in combination with clear lacquer, creates an unprecedented and unique depth effect, which highlights the high quality of the material particularly strongly.
To ensure that not only riding but also fitting is a pleasure, only the original mounting points are used for this part.

The Facts:
- With General Operating Permit (ABE)
- Sealing of all surfaces (inside and outside) with a unique plastic coating for protection against all types of environmental influences
- additional high-gloss clear lacquer finish on all visible surfaces
- optimally protected against UV light
- delivered in ready-to-install condition
- TÜV certified quality
- made from prepreg material specially produced for Ilmberger
- Manufactured in-house according to ISO 9001
- Installation using the original mounting points
- fast and easy assembly