Ilmberger Carbon lower fairing extension right side R/S, matt, Ducati Streetfighter V2, 2022-

Product details

Ilmberger carbon lower fairing extension right side R/S, matt carbon, with ABE, for Ducati Streetfighter V2, model year 2022-

General description

The engine spoiler on the Ducati Streetfighter V2 consists of multiple parts. Our right extension of the lower fairing does not replace the original colour design but enhances it. The high-quality original part painted in red is retained, while the plastic part behind it is replaced and extended. Based on the original curves and edges, the sportiness of the motorcycle is further increased.

The matt finish is identical to the surface of the Ducati Performance parts.

To achieve a particularly harmonious overall appearance, the fibre layers are expertly laid and aligned in the mould. This allows the carbon part to perfectly blend into the surrounding shapes of the motorcycle. The more of our parts that are installed and combined, the more stunning the result.
For our carbon, we exclusively use prepreg fabric produced specifically for this purpose, which is also used in a similar form in Formula 1 and space travel. The material, elaborately laminated by hand and cured in several stages in the autoclave, not only impresses with its unique appearance but also with its unique technical properties. For the same volume, it has three times the specific stiffness of steel and, due to its particularly low density, only a breakage of its weight. These properties are particularly pronounced in our products due to the high fibre volume content.
To optimally protect this high-quality material from all kinds of environmental influencess, we, as the only carbon manufacturer worldwide, use a specially developed plastic coating on all surfaces. In combination with our clear coat, this creates an unprecedented and unique depth effect, which particularly highlights the high quality of the material.
To make not only riding but also fitting a pleasure, we use only the original mounting points for this part.

The facts:

- with ABE – no additional registration required
- sealing of all surfaces (inside and out) with a unique plastic coating for protection against environmental influences of all kinds
- additional glossy clear coat finish on all visible surfaces
- optimally protected against UV light
- supplied ready for installation
- TÜV certified quality
- manufactured from prepreg material produced specifically for Ilmberger
- manufactured in-house according to ISO 9001
- installation using the original mounting points
- quick and easy installation