Ilmberger Carbon frame cover right side R/S matte for Aprilia Tuono V4 2021-

Product details

Ilmberger Carbon frame cover right side R/S matte, with ABE for Aprilia Tuono V4, from model year 2021-

General description

The carbon frame cover is applied directly to the frame. It covers it and draws attention. But the frame cover doesn't just impress visually. Thanks to the high surface quality of Ilmberger Carbon, the frame cover also withstands intensive number-plate bracket over a long period. This means there are no unpleasant wear marks on the rough cast upper of the frame after countless long tours or during daily number-plate bracket of the motorcycle. To perfect the high-quality impression, the frame cover runs not only along the vertical frame strut, where the leg rubs, but also extends far upwards, disappearing under the dense side fairing. From the outside, it is therefore difficult to see where the frame fairing begins and where it ends.
Installed in just a few minutes, the value of the motorcycle is significantly increased. To achieve a particularly harmonious overall appearance, the fibre layers are laid and aligned in the mould by experts. The carbon part thus perfectly blends into the surrounding shapes of the motorcycle. The more of our parts are installed and combined, the more impressive the result.
For our carbon, we exclusively use prepreg fabric produced specifically for this purpose, which is also used in a similar form in Formula 1 and aerospace. The material, meticulously laminated by hand and cured in several stages in an autoclave, not only boasts a unique appearance but also unique technical properties. For the same volume, it has three times the specific stiffness of steel and, due to its exceptionally low density, only a breakage of its weight. These properties are particularly pronounced in our products due to the high fibre volume content.
To optimally protect this high-quality material from all kinds of environmental influences, we, as the only carbon manufacturer worldwide, use a specially developed plastic coating on all surfaces. In combination with our clear coat, this creates an unparalleled and unique depth effect, which highlights the high quality of the material particularly strongly.
To ensure that not only riding but also fitting is a pleasure, we exclusively use the original mounting points for this part.

The facts:
- With General Operating Permit (ABE)
- Sealing of all surfaces (inside and out) with a unique plastic coating for protection against all types of environmental influences
- Additional high-gloss clear lacquer finish on all visible surfaces
- Optimally protected against UV light
- Supplied in ready-to-fit condition
- TÜV certified quality
- Made from prepreg material produced specifically for Ilmberger
- Manufactured in-house according to ISO 9001
- Installation using the original mounting points
- Quick and easy installation