Ilmberger Carbon frame cover right side R/S, glossy, BMW S1000XR 2020- M1000XR 2024-

Product details

Ilmberger Carbon frame cover right side R/S, glossy carbon, with ABE according to the usage list, for BMW
S1000XR, Type 2X99, Model Year 2020-
M1000XR, Type 2X99, Model Year 2024-

General description

The carbon frame cover is applied directly to the original cast frame. It conceals it and draws attention. But the frame cover is not only visually appealing. Thanks to the high surface quality of Ilmberger Carbon, the frame cover also withstands intensive number-plate bracket over a long period. Thus, neither after countless long tours, nor during daily number-plate bracket of the motorcycle, will there be unpleasant abrasion marks on the rough cast upper surface of the frame. To perfect the high-quality impression, the frame cover not only runs along the vertical frame strut, where the leg rubs, but also extends far upwards, disappearing under the dense side fairing. Therefore, from the outside, it is difficult to see where the frame fairing begins and where it ends.

The name Ilmberger stands for the highest quality and innovation in carbon manufacturing. Each part is produced in our own facility, where we rely on prepreg developed specifically for Ilmberger as the base material. This is processed in a complex autoclave procedure, offering numerous advantages.

Prepreg, a pre-impregnated carbon fabric, is characterised by an even resin distribution with a high fibre volume content. This leads to maximum strength and increases the flexibility of the component. Processing in an autoclave, a high-pressure oven that operates under controlled temperature and pressure conditions, ensures perfect, uniform curing and a flawless surface. This method prevents air inclusions in the material and ensures consistently high quality of the parts.

Our carbon parts are laminated by hand with great experience and care, which allows for consistent fibre alignment without distortion. After curing in the autoclave, the edges of the parts are precisely cut by robot to ensure a perfect fit and the highest quality.

A globally unique step in Ilmberger's production is the complete plastic powder coating of all carbon parts. This coating not only protects the parts from environmental influences but also gives them an incomparable deep effect. No other carbon manufacturer offers this type of sealing, which prevents the parts from aging and significantly extends their service life. Further information on plastic powder coating can be found here.

The final clear coat on this component is high-gloss and provides a perfect, smooth surface that further accentuates the luxurious-sporty look of our carbon parts. Every part that leaves our production is a masterpiece of engineering and design, meeting the highest standards.

Ilmberger is not only a leading manufacturer of carbon parts for the aftermarket but also a recognised OEM producer for renowned manufacturers such as Ducati and BMW. Among other things, we manufacture parts for BMW in the World Superbike Championship (WSBK), as well as for the BMW factory team in the Endurance World Championship (EWC), where our parts are regularly put to the test under the toughest conditions.

The expertise gained from this is incorporated into each of our products, thus improving every single component.


The facts:

Production in our own facility according to ISO 9001
With ABE - no additional registration required
Use of prepreg specially developed for Ilmberger
Autoclave production for maximum strength and perfect surfaces
Unique plastic powder coating for protection and a special deep effect
Hand lamination by experts with years of experience
Precise edge cutting by robot
High-gloss clear coat for a flawless surface
No aging of parts thanks to multi-layer protection against UV light
Supplied ready for installation
TÜV-certified quality