Ilmberger Carbon frame cover, glossy, for Aprilia RSV4 2021-

Product details

Ilmberger Carbon frame cover, glossy, with ABE for Aprilia RSV4, from model year 2021-

General description

The carbon frame cover is applied directly to the frame. It covers it and attracts attention. But the frame cover is not only visually appealing. Thanks to the high surface quality of Ilmberger Carbon, the frame cover also withstands intensive number-plate bracket over a long period. This means there are no unpleasant rubbing marks on the rough cast upper surface of the frame, neither after countless long tours nor during daily number-plate bracket of the motorcycle. To perfect the high-quality impression, the frame cover not only runs along the vertical frame strut, where the leg rubs, but also extends far upwards, disappearing under the dense side fairing. Thus, from the outside, it is difficult to see where the frame fairing begins and where it ends.
Installed in just a few minutes, the value of the motorcycle is enormously increased. To achieve a particularly harmonious overall appearance, the fibre layers are laid and aligned in the mould by experts. This way, the carbon part perfectly nestles into the surrounding shapes of the motorcycle. The more of our parts are installed and combined, the more impressive the result.
For our carbon, we exclusively use prepreg fabric specially produced for this purpose, which is also used in a similar form in Formula 1 and aerospace. The material, elaborately laminated by hand and cured in several stages in an autoclave, convinces not only with a unique appearance but also with its unique technical properties. With the same volume, it has three times the specific stiffness of steel and, at the same time, due to its particularly low density, only a breakage fraction of its weight. These properties are particularly pronounced with us due to the high fibre volume content.
To optimally protect this high-quality material from all kinds of environmental influences, we, as the only carbon manufacturer worldwide, use a specially developed plastic coating on all surfaces. In combination with our clear coat, this provides an unprecedented and unique deep effect, which particularly highlights the high quality of the material.
So that not only riding, but also working on the bike is a pleasure, we use only the original mounting points for this part.

The facts:
- With General Operating Permit (ABE)
- Sealing of all surfaces (inside and out) by a unique plastic coating for protection against all types of environmental influences
- Additional high-gloss clear lacquer finish on all visible surfaces
- Optimally protected against UV light
- Delivered ready for installation
- TÜV certified quality
- Made from prepreg material specially produced for Ilmberger
- Manufactured in-house according to ISO 9001
- Installation using the original mounting points
- Quick and easy assembly