Ilmberger Carbon Biposto Tail Fairing for BMW S1000RR and M1000RR

Product details

Ilmberger Carbon Biposto Tail Fairing for BMW
S1000RR (from model year 2023-)
M1000RR (from model year 2023-)

General description

The tail fairing for biposto operation surrounds the pillion seat and allows a sporty look of the motorcycle even when riding with a passenger. In combination with the SIA.009.M123S.K and the RHA.011.M123S.K, the entire rear can be clad in carbon, while not excluding the possibility of riding with a passenger. If the motorcycle is to be brought even closer to its racetrack origins, the monoposto tail fairing can be used.

To achieve a particularly harmonious overall appearance, the fibre layers are expertly laid and aligned in the mould. This ensures the carbon part perfectly blends with the surrounding shapes of the motorcycle. The more of our parts are installed and combined, the more impressive the result.
For our carbon, we exclusively use prepreg fabric specially produced for this purpose, which is also used in a similar form in Formula 1 and aerospace. The material, elaborately laminated by hand and cured in several stages in an autoclave, impresses not only with its unique appearance but also with its exceptional technical properties. At the same volume, it possesses three times the specific stiffness of steel and, due to its particularly low density, only a breakage of its weight. These properties are particularly pronounced in our products due to the high fibre volume content.
To optimally protect this high-quality material from influences of all kinds from the environment, we, as the only carbon manufacturer worldwide, use a specially developed plastic coating on all surfaces. In combination with our clear coat, this creates an unparalleled and unique deep effect, which truly highlights the high quality of the material.
To make not only riding but also fitting a pleasure, we use only the original mounting points for this part.

Features:
- With ABE (General Operating Permit) - no additional registration required
- Sealing of all surfaces (inside and out) with a unique plastic coating for protection against environmental influences of all kinds
- Additional high-gloss clear lacquer finish on all visible surfaces
- Optimally protected against UV light
- Delivered ready for installation
- TÜV certified quality
- Manufactured from prepreg material specially produced for Ilmberger
- Manufactured in-house according to ISO 9001
- Installation using the original mounting points
- Quick and easy assembly