Bitubo shock absorber for Yamaha Tracer 700 2016-19

Product details

BITUBO mono rear shock absorber, rebound damping adjustable (24 clicks), high-speed rebound adjustable (20 clicks), compression damping high-speed (20 clicks) and low-speed (24 clicks) adjustable, length adjustable (8mm), hydraulic spring preload 12mm adjustable (=24 clicks), spring colour in Red; for Yamaha Tracer 700, Type RM14 / RM15, Model Year 2016-19

General description

XXZ mono rear shock absorbers – the direct evolution from racing. Thanks to the versatile adjustment options, the Bitubo XXZ rear shock absorber can be easily adjusted even when installed.

The development of this damper culminates in a general weight reduction through the use of an aluminium housing – an important point to adapt the handling to the rider's requirements. Furthermore, a new set-up has been developed to further orient the XXZ towards racing performance. An upgrade for optimised performance and simplification of length and spring preload adjustment has also been installed.

The goal is to offer the rider precise control and maximum grip, even at extreme lean angles or during rapid changes of direction, as well as even tyre wear. It offers greatest confidence when accelerating on all road surfaces and perfect vehicle stability, even under the hardest braking.

Innovation also prevails inside the damper. With technically new solutions, the damping coefficient and stability at high frequencies are improved.
By using a piston rod with a 14 mm diameter, the sliding behaviour is improved, while the Ø30mm separating piston reduces uncontrolled movements of the hydraulic oil. These improvements lead to a reduction in inertia forces and thus enable immediate control of the oscillating spring movements. Special attention was also paid to improving and simplifying the adjustment options, which are now all located in the lower part of the damper.

Features:
- Compression Low-Speed: 24 clicks
- Compression High-Speed: 20 clicks
- Rebound: 24 clicks
- High-Speed Rebound: 20 clicks
- XXZ31 Hydr. Spring Preload: 12 mm = 24 clicks
- Adjustable Length: 8 mm
- Very lightweight