Bitubo shock absorber for MV Agusta Brutale 800 RR / RC / Pirelli 2018- and Dragster 800 RR / RC / Pirelli 2018-

Product details

BITUBO mono shock absorber rear, rebound damping adjustable (24 clicks), high-speed rebound adjustable (20 clicks), compression damping damping high-speed (20 clicks) and low-speed (24 clicks) adjustable, length adjustable (8mm), spring preload hydraulic 12mm adjustable (=24 clicks), spring colour in red, with ABE
For MV Agusta
Brutale 800 RR / RC / Pirelli, Type B1, model year 2018-
Brutale 800 RR LH44, Type B3, model year 2018-
Dragster 800 RR / RC / Pirelli, Type B1, model year 2018-

General description

XXZ mono shock absorber – the direct evolution from racing. Thanks to its versatile adjustment options, the Bitubo XXZ shock absorber can be easily adapted even when installed.

The development of this shock absorber culminates in a general weight reduction through the use of an aluminium casing – an important aspect for tailoring handling to the rider's requirements. Furthermore, a new set-up has been developed to further focus the XXZ on racing performance. An upgrade for optimised performance and simplification of length and hydraulic spring preload adjustment has also been installed.

The aim is to offer the rider precise control and maximum grip, even at extreme lean angles or during rapid changes of direction, as well as uniform tire wear. It offers maximum confidence during acceleration on all street surfaces and perfect stability of the rear wheel, even under the hardest braking.

Innovation also prevails inside the shock absorber. With technically new solutions, the damping coefficient and stability at high temperature are improved.
By using a piston rod with a 14 mm diameter, the sliding behaviour is improved, while the Ø30mm separating piston reduces uncontrolled movements of the hydraulic oil. These improvements lead to a reduction in inertia forces and thus enable immediate control of oscillating spring movements. Special attention was also paid to improving and simplifying the adjustment options, which are now all located in the upper part of the shock absorber.


Features:
- compression damping Low-Speed: 24 clicks
- compression damping High-Speed: 20 clicks
- Rebound: 24 clicks
- High-Speed Rebound: 20 clicks
- XXZ31 Hydr. spring preload: 12 mm = 24 clicks
- Adjustable Length: 8 mm
- Very lightweight