BITUBO shock absorber for Kawasaki ZX-10R model year 2016-20 and ZX-10RR model year 2016-20

Product Details

BITUBO mono shock absorber rear, adjustable rebound damping (24 clicks), adjustable high-speed rebound (20 clicks), adjustable high-speed compression damping damping (20 clicks) and low-speed (24 clicks), adjustable length (8mm), spring preload hydraulic 12mm adjustable (=24 clicks), spring colour in Red, with ABE; for Kawasaki
ZX-10R, Type ZXT00S (model year 2016-18)
ZX-10R, Type ZXT02E (model year 2019-20)
ZX-10RR, Type ZXT00S (model year 2016-18)
ZX-10RR, Type ZXT02E (model year 2019-20)

General Description

XXZ Mono shock absorbers – the direct evolution from racing. Thanks to the versatile adjustment options, the Bitubo XXZ shock absorber is easily adjustable even when installed.

The development of this damper culminates in a general weight reduction through the use of an aluminium housing – an important point to tune the handling to the rider's requirements. Furthermore, a new setup has been developed to further align the XXZ with racing performance. An upgrade for optimised performance and simplification of length and hydraulic spring preload adjustment has also been installed.

The goal is to offer the rider precise control and maximum grip, even in extreme lean angles or during rapid changes of direction, as well as even tire wear. It offers maximum confidence when accelerating on all street surfaces and perfect stability of the rear wheel, even under the hardest braking.

Innovation also prevails inside the damper. With technically new solutions, the damping coefficient and stability at high temperatures are improved.
By using a piston rod with a 14 mm diameter, the sliding behaviour is improved, while the Ø30mm separating piston reduces uncontrolled movements of the hydraulic oil. These improvements lead to a reduction in inertial forces and thus enable immediate control of oscillating spring movements. Special attention was also paid to improving and simplifying the adjustment options, all of which are now located in the upper part of the damper.


Features:
- compression damping Low-Speed: 24 clicks
- compression damping High-Speed: 20 clicks
- Rebound: 24 clicks
- High-Speed Rebound: 20 clicks
- XXZ31 Hydr. spring preload: 12 mm = 24 clicks
- Adjustable Length: 8 mm
- Very light