BITUBO shock absorber for Honda CBR1000RR 2008-11

Product details

BITUBO mono shock rear, rebound damping adjustable (24 clicks), high-speed rebound adjustable (20 clicks), compression damping damping high-speed (20 clicks) and low-speed (24 clicks) adjustable, length adjustable (8mm), spring preload hydraulic 12mm adjustable (=24 clicks), spring colour in red, with ABE; for Honda CBR1000RR Type: SC59 (model year 2008-'11)

General description

XXZ mono shock absorber – the direct evolution from racing. Thanks to its versatile adjustment options, the Bitubo XXZ shock absorber can be easily adapted even when installed.

The development of this damper culminates in a general weight reduction through the use of an aluminium casing – an important point to fine-tune handling to the rider's requirements. Furthermore, a new set-up has been developed to further align the XXZ with racing performance. An upgrade for optimised performance and simplification of length and hydraulic spring preload adjustment has also been installed.

The goal is to offer the rider precise control and maximum grip, even at extreme lean angles or during rapid changes in direction, as well as consistent tire wear. It offers maximum confidence when accelerating on all street surfaces and perfect rear wheel stability, even under the hardest braking.

Innovation also reigns inside the damper. Technically new solutions improve the damping coefficient and stability at high temperature.
By using a 14 mm diameter piston rod, sliding performance is improved, while the Ø30mm separating piston reduces uncontrolled movements of the hydraulic oil. These improvements lead to a reduction in inertial forces, thus allowing immediate control of oscillating spring movements. Special attention was also paid to improving and simplifying the adjustment options, which are now all located in the upper part of the damper.


Features:
- compression damping low-speed: 24 clicks
- compression damping high-speed: 20 clicks
- Rebound: 24 clicks
- High-speed rebound: 20 clicks
- XXZ31 Hydr. spring preload: 12 mm = 24 clicks
- Adjustable length: 8 mm
- Very lightweight