BITUBO shock absorber for Ducati Monster 620 and 695 M4

Product details

BITUBO mono shock absorber rear, adjustable rebound damping (24 clicks), high-speed rebound adjustable (20 clicks), high-speed compression damping (20 clicks) and low-speed (24 clicks) adjustable, length adjustable (8mm), hydraulic preload 12mm adjustable (=24 clicks), spring colour in red, with ABE
For Ducati
Monster 620, Type M4, model year 2002-03
Monster 695, Type M4, model year 2006-08

General description

XXZ Mono shock absorbers – the direct evolution from racing. Thanks to the versatile adjustment options, the Bitubo XXZ shock absorber can be easily adapted even when installed.

The development of this damper culminates in a general weight reduction through the use of an aluminium housing – an important point to fine-tune the handling to the rider's requirements. Furthermore, a new set-up has been developed to focus the XXZ even more on racing performance. An upgrade for optimised performance and simplification of length and spring preload adjustment has also been installed.

The goal is to offer the rider precise control and maximum grip, even at extreme lean angles or during rapid changes of direction, as well as even tyre wear. It offers the greatest confidence when accelerating on all road surfaces and perfect stability of the chassis, even under the hardest braking.

Innovation also prevails inside the damper. With technically new solutions, the damping coefficient and stability at high frequencies are improved.
By using a 14 mm diameter piston rod, the sliding behaviour is improved, while the Ø30mm separating piston reduces the uncontrolled movements of the hydraulic oil. These improvements lead to a reduction of inertia forces and thus enable immediate control of oscillating wheel movements. Special attention was also paid to improving and simplifying the adjustment options, which are now all located in the lower part of the damper.

Features:
- Compression Low-Speed: 24 Clicks
- Compression High-Speed: 20 Clicks
- Rebound: 24 Clicks
- High-Speed Rebound: 20 Clicks
- XXZ31 Hydr. preload: 12 mm = 24 Clicks
- Adjustable Length: 8 mm
- Very light