BITUBO shock absorber for Ducati 848 Streetfighter 12-15

Product details

BITUBO mono shock absorber rear, rebound damping adjustable (24 clicks), high-speed rebound adjustable (20 clicks), compression damping damping high-speed (20 clicks) and low-speed (24 clicks) adjustable, length adjustable (8mm), spring preload hydraulic 10mm adjustable (=20 clicks), spring colour in Red, with ABE
For Ducati
Streetfighter 848, Type F1, model year 2012-14 (ABE)
Streetfighter 848, Type F1, model year 2015 (without ABE)

General description

XXZ Mono shock absorbers – the direct evolution from racing. Thanks to its versatile adjustment options, the Bitubo XXZ shock absorber is easily adjustable even when installed.

The development of this damper culminates in a general weight reduction through the use of an aluminium housing – an important point for adapting the handling to the rider's requirements. Furthermore, a new set-up was developed to further align the XXZ with racing performance. An upgrade for optimised performance and simplification of length and hydraulic spring preload adjustment has also been installed.

The goal is to offer the rider precise control and maximum grip, even at extreme lean angles or during rapid changes of direction, as well as even tire wear. It offers utmost confidence when accelerating on all street surfaces and perfect rear wheel stability, even during the hardest braking.

Innovation also reigns inside the damper. With technically new solutions, the damping coefficient and stability at high temperature are improved.
By using a 14 mm diameter piston rod, the sliding behaviour is improved, while the Ø30mm separator piston reduces uncontrolled movements of the hydraulic oil. These improvements lead to a reduction in inertial forces and thus enable immediate control of oscillating spring movements. Special attention was also paid to improving and simplifying the adjustment options, which are now all located in the upper part of the damper.


Features:
- compression damping Low-Speed: 24 clicks
- compression damping High-Speed: 20 clicks
- Rebound: 24 clicks
- High-Speed Rebound: 20 clicks
- XXZ31 Hydr. spring preload: 12 mm = 24 clicks
- XXZ31V2 Hydr. spring preload: 10 mm = 20 clicks
- Adjustable length: 8 mm
- Very lightweight