BITUBO shock absorber for Aprilia RSV4 RF / RSV4 1100 (Factory)

Product details

BITUBO Mono shock absorber rear, rebound damping adjustable (24 clicks), high-speed rebound adjustable (20 clicks), compression damping damping high-speed (20 clicks) and low-speed (24 clicks) adjustable, length adjustable (8mm), spring preload hydraulic 10mm adjustable (=20 clicks), spring colour in Red
For Aprilia RSV4 RF, Type KE, model year 2017-2018
RSV4 1100, Type KY, model year 2021-
RSV4 1100 Factory, Type KE1, model year 2019-

General description

XXZ Mono shock absorber – the direct evolution from racing. Thanks to the versatile adjustment options, the Bitubo XXZ shock absorber is easy to adjust even when installed.

The development of this damper culminates in a general weight reduction through the use of an aluminium casing – an important point to fine-tune the handling to the rider's requirements. Furthermore, a new set-up has been developed to further align the XXZ with racing performance. An upgrade for optimised performance and simplification of length and hydraulic spring preload adjustment has also been installed.

The goal is to offer the rider precise control and maximum grip, even at extreme lean angles or during rapid changes of direction, as well as uniform tire wear. It offers the greatest confidence when accelerating on all street surfaces and perfect stability of the rear wheel, even under the hardest braking.

Innovation also prevails inside the damper. With technically new solutions, the damping coefficient and stability are improved at high temperature.
By using a piston rod with a 14 mm diameter, the sliding behaviour is improved, while the Ø30mm separating piston reduces uncontrolled movements of the hydraulic oil. These improvements lead to a reduction in inertial forces and thus enable immediate control of oscillating spring movements. Special attention has also been paid to improving and simplifying the adjustment options, which are now all located in the upper part of the damper.


Features:
- compression damping low-speed: 24 clicks
- compression damping high-speed: 20 clicks
- Rebound: 24 clicks
- High-speed rebound: 20 clicks
- XXZ31 Hydr. spring preload: 12 mm = 24 clicks
- XXZ31V2 Hydr. spring preload: 10 mm = 20 clicks
- Adjustable length: 8 mm
- Very light