BITUBO Mono Shock Absorber for Ducati Panigale V4 / V4 S / V4 Speciale / V4 R / Streetfighter V4

Product details

BITUBO Mono shock absorber rear, rebound damping adjustable (24 clicks), high-speed rebound adjustable (20 clicks), compression damping damping high-speed (20 clicks) and low-speed (24 clicks) adjustable, length adjustable (8mm), spring preload hydraulic 12mm adjustable (=24 clicks), spring colour in Red, with ABE for Ducati
Panigale V4 1100, Type DA 00 AA, model year 2018-2022
Panigale V4 S, Type DA, model year 2018-2022
Panigale V4 Speciale, Type DA, model year 2018-2019
Panigale V4 R, Type DA, model year 2019-2021
Streetfighter V4, Type FA, model year 2020-

General Description

XXZ Mono shock absorber – the direct evolution from racing. Thanks to its versatile adjustment options, the Bitubo XXZ shock absorber is easy to adjust even when installed.

The development of this damper culminates in a general weight reduction through the use of an aluminium housing – an important point for tuning the handling to the rider's requirements. Furthermore, a new set-up has been developed to focus the XXZ even more on racing performance. An upgrade for optimised performance and simplification of length and hydraulic spring preload adjustment has also been installed.

The goal is to offer the rider precise control and maximum grip, even in extreme lean angles or during fast changes of direction, as well as even tire wear. It offers greatest confidence when accelerating on all street surfaces and perfect stability of the rear wheel, even under the hardest braking.

Innovation also prevails inside the damper. With technically new solutions, the damping coefficient and stability at high temperature have been improved.
By using a piston rod with a 14 mm diameter, the sliding behaviour is improved, while the Ø30mm separator piston reduces the uncontrolled movements of the hydraulic oil. These improvements lead to a reduction of inertial forces and thus enable immediate control of oscillating spring movements. Special attention was also paid to improving and simplifying the adjustment options, all of which are now located in the upper part of the damper.


Features:
- compression damping Low-Speed: 24 clicks
- compression damping High-Speed: 20 clicks
- Rebound: 24 clicks
- High-Speed Rebound: 20 clicks
- XXZ31 Hydr. spring preload: 12 mm = 24 clicks
- Adjustable Length: 8 mm
- Very lightweight