Rapid Bike Blipper Yamaha MT09, Tracer 900
€404.00 gross €416.50 UVP brutto
Product number:
DS-K27-BLIP-002A
Product details
Rapid Bike quickshifter blipper, length approx. 45 mm, diameter approx. 14 mm, for Yamaha MT09 (ABS, Sport Tracker, Street Rally, Tracer, SP) Type: RN29 / RN43 (model year 2013-2020) and Tracer 900 Type: RN29, RN43, RN57 (model year 2016-2020) and Niken 850 GT Type: RN58 (model year 2019-2020), only for use with Rapid Bike EVO/RACING and standard footrest system, for upshifts and downshifts, for standard and reverse shifting, not compatible with RB1, RB2, RB3 modulesGeneral description
Rapid Bike BlipperLOAD CELL SENSOR FOR THE ELECTRONIC QUICKSHIFTER
With the new UP/DOWN SHIFT ASSIST (“Blipper”), Rapid Bike takes a remarkable step fronte thanks to further technological development.
In conjunction with Rapid Bike EVO and RACING modules, the new Blipper allows control of gear changes during upshifts and downshifts, without having to operate the clutch.
This allows racing enthusiasts even shorter shift times without interrupting power transfer, thus providing greater riding safety and shaving off a few tenths of a second from lap times.
This shift assistant was developed for vehicles with true Ride By Wire.
The electronics communicate via Rapid Bike's proprietary CAN-bus wiring harness with the EVO or RACING module, thereby controlling the shifting operations. The shift time and the force required to trigger the shift can be adjusted as desired in the Rapid Bike software or with the You Tune module, specific to the rider. The necessary injection adjustment during upshifts can even be gear-specific. Likewise, the duration of the speed increase during downshifts is adjustable.
The Blipper can be used in both standard shift patterns and with reverse shifting.
NOTE: Please note that a connection between the Rapid Bike EVO module and the computer must be established during initial calibration. Further information on installation and number-plate bracket can be found in the manual in the "Downloads" tab.
RAPID BIKE's latest technological revolution is an improved version of a popular accessory: the load cell sensor. The new quick-shift unit exchanges information with EVO and RACING modules via CAN-bus to ensure very precise and timely dead time, thanks to the possibility of the engine re-engaging immediately after the shift is completed.
This represents a truly innovative solution based on self-learning technology, which allows the shifting process to be reduced to as little as 20 milliseconds, while adapting to engine characteristics and riding style. The result is a seamless shifting procedure, increased riding comfort, safer gear changes, and reduced mechanical stress.
A universally applicable accessory that maintains flexibility in handling standard and reverse shift lever. This new element can also be used as a conventional quickshifter to retain the ability to adjust kill-timing with a wide range of options available with RAPID BIKE software.
The new RAPID BIKE load cell sensor can be further improved in combination with the YOUTUNE controller to adjust the pressure level in real-time for fast shifting operations.
This represents a truly innovative solution based on self-learning technology, which allows the shifting process to be reduced to as little as 20 milliseconds, while adapting to engine characteristics and riding style. The result is a seamless shifting procedure, increased riding comfort, safer gear changes, and reduced mechanical stress.
A universally applicable accessory that maintains flexibility in handling standard and reverse shift lever. This new element can also be used as a conventional quickshifter to retain the ability to adjust kill-timing with a wide range of options available with RAPID BIKE software.
The new RAPID BIKE load cell sensor can be further improved in combination with the YOUTUNE controller to adjust the pressure level in real-time for fast shifting operations.
Blipper nur in Verbindung mit EVO/RACING möglich!
DS-KRBEVO-098
€460.57
Blipper nur in Verbindung mit EVO/RACING möglich!
DS-KRBRAC-098
€633.71
Blipper nur in Verbindung mit EVO/RACING möglich!
DS-KRBEVO-098B
€460.57
Blipper nur in Verbindung mit EVO/RACING möglich!
DS-KRBRAC-098B
€633.71
| Manufacturer | Model | Additional designation | Type | Model year | Homologation | ccm |
|---|---|---|---|---|---|---|
| Yamaha | MT09 | RN29 | 2013 - 2016 | Racing | 900 | |
| Yamaha | MT09 | RN43 EURO4 | 2017 - 2020 | Racing | 900 | |
| Yamaha | MT09 Sport Tracker | RN29 | 2013 - 2016 | Racing | 900 | |
| Yamaha | MT09 Sport Tracker | RN43 EURO4 | 2017 - 2020 | Racing | 900 | |
| Yamaha | MT09 Street Rally | RN29 | 2013 - 2016 | Racing | 900 | |
| Yamaha | MT09 Tracer | RN29 | 2015 - 2016 | Racing | 900 | |
| Yamaha | MT09 Tracer | RN43 EURO4 | 2017 - 2020 | Racing | 900 | |
| Yamaha | Niken | GT | RN58 EURO4 | 2019 - 2020 | Racing | 850 |
| Yamaha | Tracer 900 | RN29 | 2016 - 2016 | Racing | 900 | |
| Yamaha | Tracer 900 | RN43 EURO4 | 2017 - 2017 | Racing | 900 | |
| Yamaha | Tracer 900 | RN57 EURO4 | 2018 - 2020 | Racing | 900 |
Seller details