Rapid Bike Blipper Honda CB1000R, 2018-2020

€404.00 gross €339.50 net €416.50 UVP brutto

Product number: DS-K27-BLIP-007A

ask for delivery time

Product details

Rapid Bike quickshifter blipper, length approx. 45 mm, diameter approx. 14 mm, for Honda CB1000R Type: SC80 (model year 2018-2020), only for use with Rapid Bike EVO/RACING and standard footrest exhaust system, for upshifting and downshifting, for normal and reverse shifting, not compatible with RB1, RB2, RB3 modules.

General description

Rapid Bike Blipper
LOAD CELL SENSOR FOR THE ELECTRONIC QUICKSHIFTER

With the new UP/DOWN SHIFT ASSIST ("Blipper"), Rapid Bike takes a remarkable step fronte thanks to further technological development.

In conjunction with Rapid Bike EVO and RACING modules, the new Blipper allows control of gear changes during upshifts and downshifts without having to operate the clutch.

This allows racing enthusiasts even shorter shift times without interruption of power transmission, thus enhancing riding safety and saving a few tenths of a second on lap times.

This shift assistant was developed for vehicles with true Ride By Wire.

The electronics communicate with the EVO or RACING module via Rapid Bike's proprietary CAN-bus wiring harness, controlling the shifting processes. Shift time and the required force to trigger the shift can be adjusted to rider-specific preferences in the Rapid Bike software or with the You Tune module. The necessary injection adjustment during upshifts can even be gear-selectively set. Similarly, the duration of the speed increase during downshifts is adjustable.

The Blipper can be used with both normal shifting patterns and reverse shifting.

NOTE: Please note that a connection between the Rapid Bike EVO module and the computer must be established during initial calibration. Further information on installation and number-plate bracket can be found in the instructions under the "Downloads" tab.

Installation and use

RAPID BIKE's latest technological revolution is an enhanced version of a popular accessory like the load sensor cell. The new quickshifter unit exchanges information with EVO and RACING modules via CAN-Bus to ensure very precise and timely kill-time, thanks to the ability for the engine to immediately resume power after the shift is completed.
This represents a truly innovative solution based on self-learning technology, allowing the shifting process to be reduced to as little as 20 milliseconds, while adapting to engine characteristics and riding style. The result is a seamless shifting procedure, increased riding comfort, safer gear changes, and reduced mechanical stress.
A universally applicable accessory that maintains flexibility in handling standard and reverse shift levers. This new element can also be used as a conventional quickshifter, retaining the possibility of adjusting kill timing with a wide range of options available with RAPID BIKE software.
The new RAPID BIKE load sensor cell can be further enhanced in combination with the YOUTUNE controller to adjust the pressure level in real-time for fast shifting operations.