Rapid Bike Blipper Kawasaki Ninja ZX-25R, 2020-2022

€404.00 gross €339.50 net €416.50 UVP brutto

Product number: DS-K27-BLIP-011

ask for delivery time

Product Details

Rapid Bike quickshifter blipper, approx. 45 mm length, approx. 14 mm diameter, for Kawasaki Ninja ZX-25R (model year 2020-2022), for use with Rapid Bike EVO/RACING and standard footrest system, for upshifts and downshifts, for standard and reverse shifting patterns, not compatible with RB1, RB2, RB3 modules.

General Description

Rapid Bike Blipper
LOAD CELL SENSOR FOR THE ELECTRONIC QUICKSHIFTER

With the new UP/DOWN SHIFT ASSIST ('Blipper'), Rapid Bike takes a remarkable step front thanks to further technological development.

In conjunction with Rapid Bike EVO and RACING modules, the new Blipper allows control of gear changes during upshifts and downshifts, without the need to operate the clutch.

This allows racing enthusiasts even shorter shift times without interrupting power delivery, thus providing greater riding safety and shaving a few tenths of a second off lap times.

This shift assistant was developed for vehicles with true Ride By Wire.

The electronics communicate with the EVO or RACING module via Rapid Bike's proprietary CAN-bus wiring harness, thereby controlling the shifting processes. The shift time and the force required to trigger the shift can be individually adjusted in the Rapid Bike software or with the You Tune module to suit the rider's preference. The necessary injection adjustment during upshifts can even be gear-selectively set. Likewise, the duration of the speed increase during downshifts is adjustable.

The Blipper can be used with both standard and reverse shifting patterns.

NOTE: Please note that during initial calibration, a connection must be established between the Rapid Bike EVO module and a computer.

RAPID BIKE's latest technological revolution is an improved version of a popular accessory: the load sensor cell. The new quickshifter unit exchanges information with EVO and RACING modules via CAN-bus to ensure a highly accurate and timely kill-time, thanks to the ability for the engine to immediately resume power after the shift is completed.
This represents a truly innovative solution based on self-learning technology, allowing the shifting process to be reduced to as little as 20 milliseconds while adapting to engine characteristics and riding style. The result is a seamless shifting procedure, increased riding comfort, safer gear changes, and reduced mechanical stress.
A universally applicable accessory that maintains flexibility when handling standard and reverse shift lever patterns. This new element can also be used as a conventional quickshifter, retaining the option to adjust kill-timing with a wide range of options available with RAPID BIKE software.
The new RAPID BIKE load sensor cell can be further enhanced in combination with the YOUTUNE controller to adjust the pressure level in real-time for rapid gear changes.