Rapid Bike Blipper Yamaha YZF-R1, 2015

€404.00 gross €339.50 net €416.50 UVP brutto

Product number: DS-K27-BLIP-002E

ask for delivery time

Product Details

Rapid Bike quick shifter blipper, length approx. 45 mm, diameter approx. 14 mm, for Yamaha YZF-R1 Type: RN32 (model year 2015), only for use with Rapid Bike EVO/RACING and a standard footrest system, for up and down shifting, for normal and reverse shifting, not compatible with RB1-, RB2-, RB3-modules

General Description

Rapid Bike Blipper
LOAD CELL SENSOR FOR THE ELECTRONIC QUICK SHIFTER

With the new UP/DOWN SHIFT ASSIST ("Blipper"), Rapid Bike takes a remarkable step front thanks to further technological development.

In conjunction with Rapid Bike EVO and RACING modules, the new Blipper allows control of gear changes when upshifting and downshifting, without having to operate the clutch.

This enables race enthusiasts to achieve even shorter shift times without interrupting power transmission, thus providing greater riding safety and shaving a tenth of a second or two off lap times.

This shift assistant was developed for vehicles with true Ride By Wire.

The electronics communicate with the EVO or RACING module via Rapid Bike's proprietary CAN-Bus wiring harness, thereby controlling the shifting processes. The shift time and the force required to initiate the shifting process can be adjusted according to rider preference in the Rapid Bike software or with the You Tune module. The necessary injection adjustment during upshifting can even be set gear-selectively. Likewise, the duration of the speed increase during downshifting is adjustable.

The Blipper can be used with both normal and reverse shift patterns.

NOTE: Please note that a connection between the Rapid Bike EVO module and the computer must be established during initial calibration. Further information on installation and number-plate bracket can be found in the instructions under the "Downloads" tab.

Installation and use

RAPID BIKE's latest technological revolution is an improved version of a popular accessory: the load sensor cell. The new quick shifter unit exchanges information with EVO and RACING modules via CAN-Bus to ensure a very accurate and timely kill time, thanks to the possibility of the engine being immediately re-engaged after the shifting process is complete.
This represents a truly innovative solution based on self-learning technology, which allows the shifting process to be reduced to as little as 20 milliseconds while adapting to engine characteristics and riding style. The result is a seamless shifting procedure, increased riding comfort, safer gear changes, and reduced mechanical stress.
A universally applicable accessory that maintains flexibility in handling standard and reverse shift levers. This new element can also be used as a conventional quick shifter, retaining the ability to adjust kill timing with a wide range of options available through RAPID BIKE software.
The new RAPID BIKE load sensor cell can be further enhanced in combination with the YOUTUNE controller to adjust the pressure level in real-time for fast shifting operations.