Rapid Bike Blipper Honda CBR1000RR(R), 2017-2022

€404.00 gross €339.50 net €416.50 UVP brutto

Product number: DS-K27-BLIP-007

Available immediately

Product Details

Rapid Bike blipper quickshifter, length approx. 45 mm, diameter approx. 14 mm, for Honda CBR1000RR Fireblade (without DCT) Type: SC77 (model year 2017-2019) and CBR1000RR-R Fireblade (without DCT) Type: SC82 (model year 2020-2022), only for use with Rapid Bike EVO/RACING and standard footrest system, for upshifting and downshifting, for normal and reverse shift patterns, not compatible with RB1, RB2, RB3 modules

General Description

Rapid Bike Blipper
SENSOR WITH LOAD CELL FOR THE ELECTRONIC QUICKSHIFTER

With the new UP/DOWN SHIFT ASSIST ('Blipper'), Rapid Bike takes a remarkable step front thanks to further technological development.

In conjunction with Rapid Bike EVO and RACING modules, the new blipper allows control of gear changes during upshifting and downshifting without having to operate the clutch.

This allows racing enthusiasts even shorter shift times without interrupting power delivery, thus providing greater riding safety and shaving a few tenths of a second off lap times.

This shift assistant was developed for vehicles with true Ride By Wire.

The electronics communicate with the EVO or RACING module via Rapid Bike's proprietary CAN-Bus wiring harness, thereby controlling the shifting processes. The shift time and the force required to trigger the shifting process can be adjusted in the Rapid Bike software or with the You Tune module, tailored to the rider's specific preferences. The necessary injection adjustment during upshifting can even be gear-selectively set. Similarly, the duration of the speed increase during downshifting is adjustable.

The blipper can be used with both normal and reverse shift patterns.

NOTE: Please note that for initial calibration, a connection must be established between the Rapid Bike EVO module and a computer. Further information on installation and number-plate bracket can be found in the manual under the 'Downloads' tab.

Installation and use

RAPID BIKE's latest technological revolution is an improved version of a popular accessory such as the load sensor cell. The new quick-shift unit exchanges information with EVO and RACING modules via CAN-Bus to ensure a very accurate and timely kill-time, thanks to the possibility that the engine is immediately re-engaged after the shifting process is completed.
This represents a truly innovative solution based on self-learning technology, allowing the shifting process to be reduced to as little as 20 milliseconds while adapting to engine characteristics and riding style. The result is a seamless shifting procedure, enhanced riding comfort, secure gear change, and reduced mechanical stress.
A universally applicable accessory that maintains flexibility in handling standard and reverse shift lever. This new element can also be used as a conventional quickshifter to retain the possibility of adjusting kill-timing with a wide range of options available with RAPID BIKE software.
The new RAPID BIKE load sensor cell can be further improved in combination with the YOUTUNE controller to adjust the pressure level in real-time for fast shifting operations.