Rapid Bike Blipper Ducati 959 Panigale, 2016-2019

€404.00 gross €339.50 net €416.50 UVP brutto

Product number: DS-K27-BLIP-004A

Available immediately

Product Details

Rapid Bike Quickshifter Blipper, length approx. 45 mm, diameter approx. 14 mm, for Ducati 959 Panigale Type: HA (model year 2016-´19), only possible for use with Rapid Bike EVO/RACING and the standard footrest system, for upshifts and downshifts, for standard and reverse shift patterns, not compatible with RB1, RB2, RB3 modules

General Description

Rapid Bike Blipper
LOAD CELL SENSOR FOR THE ELECTRONIC QUICKSHIFTER

With the new UP/DOWN SHIFT ASSIST ("Blipper"), Rapid Bike makes a remarkable step front thanks to further technological development.

In conjunction with Rapid Bike EVO and RACING modules, the new Blipper allows control of gear changes during upshifts and downshifts, without having to operate the clutch.

This allows racing enthusiasts even shorter shift times without interruption of power transmission, thus providing more riding safety and shaving off a few tenths of a second from lap times.

This shift assistant was developed for vehicles with true Ride By Wire.

The electronics communicate with the EVO or RACING module via Rapid Bike's own CAN-bus wiring harness, thus controlling the shifting processes. The shift time and the necessary force to trigger the shifting process can be adjusted in the Rapid Bike software or with the You Tune module, tailored to the rider's specific wishes. The necessary adjustment of the injection during upshifts can even be set gear-selectively. Likewise, the duration of the increase in speed during downshifts is adjustable.

The Blipper can be used with both standard and reverse shift patterns.

NOTE: Please note that a connection between the Rapid Bike EVO module and the computer must be established during the initial calibration. Further information on installation and number-plate bracket can be found in the manual under the "Downloads" tab.

Installation and use

Rapid Bike's latest technological revolution is an improved version of a popular accessory: the load cell sensor. The new quick shifter unit exchanges information with EVO and RACING modules via CAN-bus to ensure a very precise and timely kill time, thanks to the ability for the engine to immediately resume power delivery after the gear change is completed.
This represents a truly innovative solution based on self-learning technology, which allows the shifting process to be reduced to as little as 20 milliseconds while adapting to engine characteristics and riding style. The result is a seamless shifting procedure, increased riding comfort, safe gear changes, and reduced mechanical stress.
A universally applicable accessory that maintains flexibility when handling standard and reverse shift lever. This new element can also be used as a conventional quick shifter to retain the possibility of adjusting kill-timing with a wide range of options available with Rapid Bike software.
The new Rapid Bike load cell sensor can be further improved in combination with the YouTune controller to adjust the pressure level in real-time for fast gear changes.