Rapid Bike Blipper Ducati 1299 Panigale (S/R)

€404.00 gross €339.50 net €416.50 UVP brutto

Product number: DS-K27-BLIP-004C

ask for delivery time

Product Details

Rapid Bike quickshifter Blipper, length approx. 45 mm, diameter approx. 14 mm, for Ducati 1299 Panigale (S/R) Type: H9 (model year 2015-´19), only for use with Rapid Bike EVO/RACING and standard footrest system, for upshifting and downshifting, for standard and reverse shifting, not compatible with RB1, RB2, RB3 modules

General Description

Rapid Bike Blipper
LOAD CELL SENSOR FOR THE ELECTRONIC QUICKSHIFTER

With the new UP/DOWN SHIFT ASSIST ("Blipper"), Rapid Bike takes a remarkable step fronte thanks to a further technological development.

In conjunction with Rapid Bike EVO and RACING modules, the new Blipper allows control of gear changes when upshifting and downshifting, without having to operate the clutch.

This allows racing enthusiasts even shorter shift times without interruption of power transmission, thus providing more riding safety and shaving off precious tenths of a second from lap times.

This shift assistant was developed for vehicles with true Ride By Wire.

The electronics communicate with the EVO or RACING module via Rapid Bike's own CAN-Bus wiring harness, controlling the shifting operations. The shift time and the force required to trigger the shifting process can be adjusted according to the rider's preference in the Rapid Bike software or with the You Tune module. The necessary adjustment of the injection when upshifting can even be set gear-selectively. Likewise, the duration of the speed increase during downshifting is adjustable.

The Blipper can be used in both standard and reverse shift patterns.

NOTE: Please note that a connection between the Rapid Bike EVO module and the computer must be established for initial calibration. For further information on installation and number-plate bracket, please refer to the instructions in the "Downloads" tab.

Installation and use

RAPID BIKE's latest technological revolution is an improved version of a popular accessory: the load sensor cell. The new quick shift unit exchanges information with EVO and RACING modules via CAN-Bus to ensure a very accurate and timely kill time, thanks to the ability for the engine to immediately resume power after the shift is completed.
This represents a truly innovative solution based on self-learning technology, allowing the shifting process to be reduced to as little as 20 milliseconds while adapting to engine characteristics and riding style. The result is a seamless shifting procedure, increased riding comfort, safer gear, and reduced mechanical stress.
A universally applicable accessory that maintains flexibility in handling standard and reverse shift lever. This new element can also be used as a conventional quickshifter to retain the possibility of adjusting kill timing with a wide range of options available with RAPID BIKE software.
The new RAPID BIKE load sensor cell can be further enhanced in combination with the YOUTUNE controller to adjust the pressure level in real-time for rapid shifting operations.