Rapid Bike Blipper Ducati 1199 Panigale/S/R

€404.00 gross €339.50 net €416.50 UVP brutto

Product number: DS-K27-BLIP-004B

ask for delivery time

Product details

Rapid Bike quickshifter blipper, length approx. 45 mm, diameter approx. 14 mm, for Ducati 1199 Panigale (S) Type: H8 (model year 2012-´16) and 1199 Panigale R Type: H8 (model year 2015-´16), only for use with Rapid Bike EVO/RACING and standard footrest system, for up- and downshifting, for standard and reverse shift patterns, not compatible with RB1, RB2, RB3 modules

General description

Rapid Bike Blipper
LOAD CELL SENSOR FOR THE ELECTRONIC QUICKSHIFTER

With the new UP/DOWN SHIFT ASSIST ("Blipper"), Rapid Bike takes a remarkable step fronte thanks to a further technological development.

In conjunction with Rapid Bike EVO and RACING modules, the new Blipper allows control of gear changes when up- and downshifting, without having to operate the clutch.

This allows racing enthusiasts even shorter shift times without interrupting power transfer, thus providing greater riding safety and saving a few tenths of a second on lap times.

This shift assistant was developed for vehicles with true Ride By Wire.

The electronics communicate with the EVO or RACING module via Rapid Bike's own CAN-bus wiring harness, thereby controlling the shifting processes. The shift time and the required force to trigger the shifting process can be individually adjusted in the Rapid Bike software or with the You Tune module, according to the rider's preference. The necessary adjustment of the injection when upshifting can even be set gear-selectively. Similarly, the duration of the speed increase when downshifting is adjustable.

The Blipper can be used with both standard and reverse shift patterns.

NOTE: Please note that a connection between the Rapid Bike EVO module and the computer must be established for initial calibration. Further information on installation and number-plate bracket can be found in the manual under the 'Downloads' tab.

Installation and use

RAPID BIKE's latest technological revolution is an improved version of a popular accessory: the load sensor cell. The new quick-shifter unit exchanges information with EVO and RACING modules via CAN-Bus to ensure a very precise and timely kill time, thanks to the ability for the engine power to be restored immediately after the shifting process is completed.
This represents a truly innovative solution based on self-learning technology, which allows the shifting process to be reduced to up to 20 milliseconds while adapting to engine characteristics and riding style. The result is a seamless shifting procedure, increased riding comfort, safer gear changes, and reduced mechanical stress.
A universally applicable accessory that maintains flexibility in handling standard and reverse shift levers. This new element can also be used as a conventional quickshifter, retaining the ability to adjust kill timing with a wide range of options available with RAPID BIKE software.
The new RAPID BIKE load sensor cell can be further enhanced in combination with the YOUTUNE controller to adjust the pressure level in real-time for fast shifting operations.