Rapid Bike Blipper Ducati 899 Panigale, 2014-2015

€404.00 gross €339.50 net €416.50 UVP brutto

Product number: DS-K27-BLIP-004

Available immediately

Product details

Rapid Bike Blipper quickshifter, length approx. 45 mm, diameter approx. 14 mm, for Ducati 899 Panigale, Type: H8, (model year 2014-´15), only for use with Rapid Bike EVO/RACING and the standard footrest exhaust system, for upshifting and downshifting, for standard and reverse shifting, not compatible with RB1, RB2, RB3 modules.

General description

Rapid Bike Blipper
LOAD CELL SENSOR FOR THE ELECTRONIC QUICKSHIFTER

With the new UP/DOWN SHIFT ASSIST ("Blipper"), Rapid Bike takes a remarkable step fronte thanks to further technological development.

In conjunction with Rapid Bike EVO and RACING modules, the new Blipper allows control of gear changes during both upshifts and downshifts, without having to operate the clutch.

This enables racing enthusiasts to achieve even shorter shift times without interrupting power delivery, thereby increasing riding safety and shaving off a few tenths of a second from lap times.

This shift assistant was developed for vehicles with true Ride By Wire.

The electronics communicate via Rapid Bike's proprietary CAN bus wiring harness with the EVO or RACING module, controlling the shifting processes. The shift time and the required force to trigger the shifting process can be adjusted driver-specifically as desired in the Rapid Bike software or with the You Tune module. The necessary adjustment of fuel injection during upshifts can even be set gear-selectively. Similarly, the duration of the speed increase during downshifts is adjustable.

The Blipper can be used with both standard and reverse shift patterns.

NOTE: Please note that a connection between the Rapid Bike EVO module and the computer must be established during initial calibration. Further information on installation and number-plate bracket can be found in the instructions under the "Downloads" tab.

Installation and use

RAPID BIKE's latest technological revolution is an improved version of a popular accessory such as the load cell sensor. The new quickshifter unit exchanges information with EVO and RACING modules via CAN bus to ensure a very precise and timely kill time, thanks to the possibility of the engine revving up immediately after the shifting process is complete.
This represents a truly innovative solution based on a self-learning technology that allows the shifting process to be reduced to up to 20 milliseconds while adapting to engine characteristics and riding style. The result is a seamless shifting procedure, increased riding comfort, safer gear changes, and reduced mechanical stress.
A universally applicable accessory that maintains flexibility in handling standard and reverse shift lever patterns. This new element can also be used as a conventional quickshifter to retain the ability to adjust kill timing with a wide range of options available with RAPID BIKE software.
The new RAPID BIKE load cell sensor can be further enhanced in combination with the YOUTUNE controller to adjust the pressure level in real-time for fast gear changes.